Le Wed, 01 Apr 2009 09:32:23 +0200 (CEST) Michael Schmitz <[email protected]> a _crit:
> > With the coming soon CTPCI (PCI expansion board for Atari Falcon+CT60), > > I decided to give Linux/m68k a try. > > > > Unfortunately, no kernels I tried on the CT60 seem to work, I just get > > a black screen, and then reboot after a few seconds (for the atari > > flavour of m68k kernels). > > > > The one I tried is: > > http://people.debian.org/~smarenka/d-i/m68k/images/daily/kernels/vmlinuz-2.6.26-1-atari > > with the bootstrap program from: > > http://people.debian.org/~smarenka/d-i/m68k/images/daily/tools/atari/ > > While I probably haven't tested that particular one, I am fairly certain that > Stephens kernels did work. > > The bootstrap should be renamed to ataboot.tos - I had weird errors when > running OK, I tried with video=atafb:sthigh and I also boot it from an empty state (i.e. booting Falcon with Control key pressed), and it managed to start this time. I did not remember it was so loooong to boot it. One thing I notice: the clock time jumps somewhere from [0] PID hash table entries... to [42949372.97] Console: colour dummy device 80x25 in kernel log I also remember now that all PCI stuff was disabled for m68k arch in kernel. Would it be hard to get it back? -- Patrice Mandin WWW: http://pmandin.atari.org/ Programmeur Linux, Atari Spécialité: Développement, jeux -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
