Le Tue, 14 Apr 2009 05:38:12 +0200 (CEST) Michael Schmitz <[email protected]> a _crit:
> > OK, I was able to setup debug through serial console, using > > $ minicom -o -c on > > and adding > > debug=ser console=tty0 console=ttyS0,9600n8 > > in kernel command line > > FWIW, it should be console=ttyS1,9600n8 (the modem port is ttyS1). With > debug=ser, this does not matter. > > > [ 0.000000] atari_stram pool, start=00373210, end=003f320f > > This patch actually never made it into Geert's tree. Bummer. > > Anyway: do you have a section like this in your log? > > Ignoring memory chunk at 0x0:0xe00000 before the first chunk > Fix your bootloader or use a memfile to make use of this area! Yes, I have this message in my log. Full log attached (seems minicom cut it at 80 cols). > The whole of ST-RAM is being ignored (2.6.29). No wonder there's no suitable > RAM > for atafb. How do I use a memfile with ataboot? -- Patrice Mandin WWW: http://pmandin.atari.org/ Programmeur Linux, Atari Spécialité: Développement, jeux
[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-1-atari (Debian 2.6.26-9) ([email protected] [ 0.000000] Enabling workaround for errata I14 [ 0.000000] console [debug0] enabled [ 0.000000] Atari hardware found: VIDEL STDMA-SCSI ST_MFP STND_DMA YM2149 PC [ 0.000000] Ignoring memory chunk at 0x0:0xe00000 before the first chunk [ 0.000000] Fix your bootloader or use a memfile to make use of this area! [ 0.000000] On node 0 totalpages: 16000 [ 0.000000] DMA zone: 141 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 15859 pages, LIFO batch:3 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] atari_stram pool, start=00373210, end=003f320f [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa9 [ 0.000000] Kernel command line: root=/dev/hda5 video=atafb:sthigh debug=serz [ 0.000000] PID hash table entries: 256 (order: 8, 1024 bytes) [42949372.960000] Console: colour dummy device 80x25 [42949372.970000] console [tty0] enabled [42949372.990000] console [ttyS0] enabled [42949373.010000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [42949373.020000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [42949373.060000] Memory: 59836k/59904k available (1956k kernel code, 2028k dat) [42949373.080000] Calibrating delay loop... 145.40 BogoMIPS (lpj=727040) [42949373.320000] Security Framework initialized [42949373.330000] SELinux: Disabled at boot. [42949373.340000] Capability LSM initialized [42949373.350000] Mount-cache hash table entries: 512 [42949373.360000] Initializing cgroup subsys ns [42949373.370000] Initializing cgroup subsys cpuacct [42949373.380000] Initializing cgroup subsys devices [42949373.390000] net_namespace: 648 bytes [42949373.410000] NET: Registered protocol family 16 [42949373.470000] SCSI subsystem initialized [42949373.530000] NET: Registered protocol family 2 [42949373.630000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [42949373.640000] TCP established hash table entries: 2048 (order: 2, 16384 byt) [42949373.660000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [42949373.670000] TCP: Hash tables configured (established 2048 bind 2048) [42949373.680000] TCP reno registered [42949373.720000] NET: Registered protocol family 1 [42949373.740000] audit: initializing netlink socket (disabled) [42949373.750000] type=2000 audit(1236850311.790:1): initialized [42949373.760000] VFS: Disk quotas dquot_6.5.1 [42949373.770000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [42949373.780000] msgmni has been set to 117 [42949373.790000] Block layer SCSI generic (bsg) driver version 0.4 loaded (maj) [42949373.800000] io scheduler noop registered [42949373.810000] io scheduler anticipatory registered [42949373.820000] io scheduler deadline registered [42949373.830000] io scheduler cfq registered (default) [42949373.840000] atafb_init: start [42949373.850000] atafb_init: initializing Falcon hw [42949373.860000] atari_stram_alloc(size=00011000,owner=atafb) [42949373.870000] atari_stram_alloc: after mem_init, find_free_Stram=00373210 [42949373.880000] atafb: screen_base 00374000 real_screen_base 00374000 screen_6 [42949373.890000] Determined 640x400, depth 1 [42949373.900000] virtual 640x819 [42949373.930000] Console: switching to mono frame buffer device 80x25 [42949373.950000] fb0: frame buffer device, using 64K of video memory [42949374.080000] SCC: Atari Falcon Serial Driver [42949374.090000] SCC: already initialized, expect trouble! [42949374.100000] Non-volatile memory driver v1.2 [42949374.110000] atari_stram_alloc(size=00003e00,owner=ataflop) [42949374.120000] atari_stram_alloc: after mem_init, find_free_Stram=00384210 [42949374.140000] Atari floppy driver: max. HD, track buffering [42949374.150000] Probing floppy drive(s): [42949374.170000] fd0 [42949374.240000] brd: module loaded [42949374.250000] Uniform Multi-Platform E-IDE driver [42949374.260000] ide: Assuming 50MHz system bus speed for PIO modes; override x [42949374.280000] ide: Falcon IDE controller [42949374.290000] Probing IDE interface ide0... [42949374.600000] hda: ST34310A, ATA DISK drive [42949375.340000] ide0 at 0xfff00000 on irq 15 [42949375.360000] hda: max request size: 128KiB [42949375.370000] hda: 8420832 sectors (4311 MB) w/512KiB Cache, CHS=8354/16/63 [42949375.400000] hda: cache flushes not supported [42949375.410000] hda: AHDI hda1 hda2 hda3 XGM< hda4 hda5 > [42949375.560000] scsi0: options CAN_QUEUE=8 CMD_PER_LUN=1 SCAT-GAT=0 TAGGED-QU7 [42949375.600000] scsi0 : Atari native SCSI [42949375.620000] blk_queue_max_hw_segments: set to minimum 1 [42949375.880000] blk_queue_max_hw_segments: set to minimum 1 [42949375.890000] Driver 'sd' needs updating - please use bus_type methods [42949375.900000] mice: PS/2 mouse device common for all mice [42949376.480000] blk_queue_max_hw_segments: set to minimum 1 [42949376.740000] blk_queue_max_hw_segments: set to minimum 1 [42949376.750000] input: Atari Keyboard as /class/input/input0 [42949377.010000] blk_queue_max_hw_segments: set to minimum 1 [42949377.270000] blk_queue_max_hw_segments: set to minimum 1 [42949377.300000] TCP cubic registered [42949377.310000] NET: Registered protocol family 17 [42949377.320000] NET: Registered protocol family 15 [42949377.580000] blk_queue_max_hw_segments: set to minimum 1 [42949377.600000] registered taskstats version 1 [42949377.620000] scsi: waiting for bus probes to complete ... [42949377.880000] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [42949377.900000] VFS: Mounted root (ext2 filesystem) readonly. [42949377.980000] SCC: open port done! [snip] [42949491.050000] SCC: open port done! [42949493.280000] Restarting system.
