On Tue, Apr 28, 2009 at 09:58:31AM -0500, Stephen R Marenka wrote: > On Mon, Apr 27, 2009 at 10:33:14PM +0200, Geert Uytterhoeven wrote: > > On Mon, Apr 27, 2009 at 20:56, Stephen R Marenka <[email protected]> > > wrote: > > > It was recently pointed out to me that under aranym there is no > > > /dev/rtc and none of the rtc-*.ko modules helps. > > > > > > Of course openntpd does. > > > > > > Should rtc work? Did I miss something in the kernel config? > > > > Works here! > > > > $ hwclock -ur > > Tue Apr 28 00:25:59 2009 -1.010041 seconds > > $ > > > > There are actually 4 options, some will not work yet, though: > > 1. CONFIG_RTC_CLASS=n, CONFIG_GEN_RTC=[my], /dev/rtc = 10,135 > > This is what I was using, using the deprecated generic RTC interface. > > 2. CONFIG_RTC_CLASS=n, CONFIG_RTC=[my], /dev/rtc = 10,135 > > Old style CMOS RTC driver, used to work on PC and Atari. > > 3. CONFIG_RTC_CLASS=y, CONFIG_RTC_DRV_GENERIC=[my], /dev/rtc is dynamic > > Should work, as of 2.6.30-rc1, using RTC class on top of the > > generic RTC interface. > > 4. CONFIG_RTC_CLASS=y, CONFIG_RTC_DRV_CMOS=[my], /dev/rtc is dynamic > > While rtc-cmos can be enabled on Atari (it was derived from > > rtc.c), it won't work yet, > > as the necessary rtc_cmos platform device is not yet created on Atari. > > Config fixed for debian 2.6.29-4. > > Thanks! > > Stephen > > -- > Stephen R. Marenka If life's not fun, you're not doing it right! > <[email protected]>
But I don't think the CONFIG_RTC_CLASS=y is correct for the Amiga kernel builds but it is selected in the .config for the -amiga kernels available from http://people.debian.org/~smarenka/m68k/kernel/ (the 2.6.26 and 2.6.28 that I have looked at, anyway). I believe that CONFIG_GEN_RTC=y and CONFIG_GEN_RTC_X=y should be the proper selections and CONFIG_RTC_CLASS should not be set. These are the defaults for the m68k arch. I am currently building a kernel with these selection changes to verify (2.6.29.1). --Lance -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
