On 8/20/20 12:20 PM, Karoly Balogh (Charlie/SGR) wrote: > I cross-built a recent 3.2.1 compiler from our fixes_3_2 branch (this will > be released as 3.2.2, eventually), I uploaded it here: > > https://coderetro.net/temp/linux-m68k/ > > Can you try bootstrapping with this compiler binary? At least from FPC's > perspective, you shouldn't need anything else, to initiate a cross build > than a bootstrap compiler binary, and GNU binutils and make. Not sure if > Debian needs anything else. > > If this also crashes, then I have to dig deeper to identify the problem, > because 3.2.x will be with us for a while, and I'd like it to be built for > Debian-m68k.
It still fails with: numlib/units/m68k-linux/spe.s: Assembler messages: numlib/units/m68k-linux/spe.s:1751: Error: cannot create floating-point number spe.pas(1793) Error: Error while assembling exitcode 1 spe.pas(1793) Fatal: There were 2 errors compiling module, stopping Fatal: Compilation aborted The installer encountered the following error: Compilation of "BuildUnit_numlib.pp" failed make[2]: *** [Makefile:1729: smart] Error 1 make[2]: Leaving directory '/root/src/fpc-3.2.0/packages' make[1]: *** [Makefile:2681: packages_smart] Error 2 make[1]: Leaving directory '/root/src/fpc-3.2.0' make: *** [Makefile:2836: build-stamp.m68k-linux] Error 2 I used your binary and the source tarball for FPC 3.2.0. Adrian -- .''`. John Paul Adrian Glaubitz : :' : Debian Developer - [email protected] `. `' Freie Universitaet Berlin - [email protected] `- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
