Your message dated Mon, 26 Dec 2016 15:19:04 +0000 with message-id <[email protected]> and subject line Bug#848016: fixed in espeak-ng 1.49.0+dfsg-3 has caused the Debian Bug report #848016, regarding espeak-ng: noticable delays in speech output to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 848016: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=848016 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: brltty-espeak Version: 5.4-3 Severity: important Hi after an upgrade of brltty-espeak (which links to espeak-ng), the speech output is very monotonous and all speech rhythm lost, including e.g. breaks for periods at the end of a sentence. That makes it hard to listen to it for a longer period. It is likely to be a brltty-espeak issue, because espeak-ng -w test.wav "Some longer text, it has proper stressing of words." aplay test.wav sounds as `espeak -w test.wav ...`, so without any change. Furthermore, there is a noticeable delay when interrupting speech with e.g. the control key. This is problematic when scrolling through texts, because some portion of the old line is spoken before the new text starts. This makes it impossible for speech-only users to figure out what is actually on the line I have taken a log with `brltty -ldebug,speech` and have attached it. Please let me know if I can provide more information to help resolving this issue. Thanks -- System Information: Debian Release: stretch/sid APT prefers testing APT policy: (500, 'testing'), (10, 'unstable') Architecture: i386 (i686) Kernel: Linux 4.8.0-1-686-pae (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages brltty-espeak depends on: ii brltty 5.4-3 ii libc6 2.24-7 ii libespeak-ng1 1.49.0+dfsg-2 brltty-espeak recommends no packages. brltty-espeak suggests no packages. -- no debconf information2016-12-13@09:44:11.261 [brltty] BRLTTY 5.4 rev BRLTTY-5.4 [http://brltty.com/] 2016-12-13@09:44:11.283 [brltty] lock descriptor allocated: queue-discarded-elements 2016-12-13@09:44:11.283 [brltty] Protokollierungsausführlichkeit: debug,speech 2016-12-13@09:44:11.284 [brltty] pushed command environment: initial 2016-12-13@09:44:11.284 [brltty] report listener registered: 0: handleUpdateBrailleOnline 2016-12-13@09:44:11.285 [brltty] program exit event added: screen-data 2016-12-13@09:44:11.285 [brltty] Arbeitsverzeichnis: /home/swannie 2016-12-13@09:44:11.285 [brltty] Konfigurationsdatei: /etc/brltty.conf 2016-12-13@09:44:11.285 [brltty] Modifizierbares Verzeichnis: /var/lib/brltty 2016-12-13@09:44:11.285 [brltty] Einstellungsdatei: brltty.prefs 2016-12-13@09:44:11.285 [brltty] Verzeichnis mit Schreibzugriff: /var/run/brltty 2016-12-13@09:44:11.285 [brltty] Treiber-Verzeichnis: /lib/brltty 2016-12-13@09:44:11.285 [brltty] Tabellenverzeichnis: /etc/brltty 2016-12-13@09:44:11.306 [brltty] program exit event added: tunes 2016-12-13@09:44:11.306 [brltty] tune thread state change: 0 -> 1 2016-12-13@09:44:11.307 [brltty] tune thread state change: 1 -> 3 2016-12-13@09:44:11.307 [brltty] regions: text=0.0 status=0.0 2016-12-13@09:44:11.307 [brltty] shifts: full=1 half=0 vertical=5 2016-12-13@09:44:11.307 [brltty] checking for text table: /etc/brltty/Text/de_DE.ttb 2016-12-13@09:44:11.349 [brltty] checking for text table: /etc/brltty/Text/de.ttb 2016-12-13@09:44:11.364 [brltty] compiling text table: /etc/brltty/Text/de.ttb 2016-12-13@09:44:11.364 [brltty] file opened: /etc/brltty/Text/de.ttb fd=8 2016-12-13@09:44:11.364 [brltty] including data file: /etc/brltty/Text/de.ttb 2016-12-13@09:44:11.371 [brltty] file opened: /etc/brltty/Text/ltr-latin.tti fd=9 2016-12-13@09:44:11.371 [brltty] including data file: /etc/brltty/Text/ltr-latin.tti 2016-12-13@09:44:11.382 [brltty] file opened: /etc/brltty/Text/ltr-alias.tti fd=10 2016-12-13@09:44:11.382 [brltty] including data file: /etc/brltty/Text/ltr-alias.tti 2016-12-13@09:44:11.389 [brltty] file opened: /etc/brltty/Text/ctl-latin.tti fd=9 2016-12-13@09:44:11.390 [brltty] including data file: /etc/brltty/Text/ctl-latin.tti 2016-12-13@09:44:11.398 [brltty] file opened: /etc/brltty/Text/num-dot6.tti fd=9 2016-12-13@09:44:11.398 [brltty] including data file: /etc/brltty/Text/num-dot6.tti 2016-12-13@09:44:11.398 [brltty] file opened: /etc/brltty/Text/num-alias.tti fd=10 2016-12-13@09:44:11.398 [brltty] including data file: /etc/brltty/Text/num-alias.tti 2016-12-13@09:44:11.400 [brltty] file opened: /etc/brltty/Text/common.tti fd=9 2016-12-13@09:44:11.400 [brltty] including data file: /etc/brltty/Text/common.tti 2016-12-13@09:44:11.401 [brltty] file opened: /etc/brltty/Text/spaces.tti fd=10 2016-12-13@09:44:11.401 [brltty] including data file: /etc/brltty/Text/spaces.tti 2016-12-13@09:44:11.415 [brltty] file opened: /etc/brltty/Text/boxes.tti fd=10 2016-12-13@09:44:11.415 [brltty] including data file: /etc/brltty/Text/boxes.tti 2016-12-13@09:44:11.417 [brltty] file opened: /etc/brltty/Text/blocks.tti fd=10 2016-12-13@09:44:11.417 [brltty] including data file: /etc/brltty/Text/blocks.tti 2016-12-13@09:44:11.417 [brltty] Texttabelle: de 2016-12-13@09:44:11.417 [brltty] program exit event added: text-table 2016-12-13@09:44:11.418 [brltty] Attributtabelle: left_right 2016-12-13@09:44:11.418 [brltty] program exit event added: attributes-table 2016-12-13@09:44:11.418 [brltty] program exit event added: contraction-table 2016-12-13@09:44:11.418 [brltty] Kurzschrifttabelle: keine 2016-12-13@09:44:11.418 [brltty] Keyboard Property: type= 2016-12-13@09:44:11.418 [brltty] Keyboard Property: vendor= 2016-12-13@09:44:11.418 [brltty] Keyboard Property: product= 2016-12-13@09:44:11.418 [brltty] program exit event added: keyboard-table 2016-12-13@09:44:11.418 [brltty] compiling keyboard table: /etc/brltty/Keyboard/laptop.ktb 2016-12-13@09:44:11.418 [brltty] program exit event added: sorted-command-table 2016-12-13@09:44:11.419 [brltty] file opened: /etc/brltty/Keyboard/laptop.ktb fd=8 2016-12-13@09:44:11.419 [brltty] including data file: /etc/brltty/Keyboard/laptop.ktb 2016-12-13@09:44:11.435 [brltty] file opened: /etc/brltty/Keyboard/kp_say.kti fd=9 2016-12-13@09:44:11.435 [brltty] including data file: /etc/brltty/Keyboard/kp_say.kti 2016-12-13@09:44:11.436 [brltty] file opened: /etc/brltty/Keyboard/kp_speak.kti fd=9 2016-12-13@09:44:11.436 [brltty] including data file: /etc/brltty/Keyboard/kp_speak.kti 2016-12-13@09:44:11.437 [brltty] program exit event added: keyboard-monitor 2016-12-13@09:44:11.438 [brltty] activity action request: keyboard-monitor: start 2016-12-13@09:44:11.438 [brltty] activity state change: keyboard-monitor: 4[preparing] 2016-12-13@09:44:11.438 [brltty] activity state change: keyboard-monitor: 1[prepared] 2016-12-13@09:44:11.438 [brltty] activity state change: keyboard-monitor: 2[scheduled] 2016-12-13@09:44:11.438 [brltty] constructing special screen: help 2016-12-13@09:44:11.440 [brltty] Tastaturtabelle: laptop 2016-12-13@09:44:11.440 [brltty] program exit event added: screen-driver 2016-12-13@09:44:11.440 [brltty] activity action request: screen-driver: start 2016-12-13@09:44:11.440 [brltty] activity state change: screen-driver: 4[preparing] 2016-12-13@09:44:11.440 [brltty] activity state change: screen-driver: 1[prepared] 2016-12-13@09:44:11.440 [brltty] activity state change: screen-driver: 2[scheduled] 2016-12-13@09:44:11.440 [brltty] BrlAPI Server: release 0.6.5 2016-12-13@09:44:11.440 [brltty] API Parameter: auth= 2016-12-13@09:44:11.440 [brltty] API Parameter: host= 2016-12-13@09:44:11.440 [brltty] API Parameter: stacksize= 2016-12-13@09:44:11.440 [brltty] program exit event added: address-table 2016-12-13@09:44:11.440 [brltty] program exit event added: api-server 2016-12-13@09:44:11.440 [brltty] program exit event added: braille-data 2016-12-13@09:44:11.440 [brltty] program exit event added: braille-driver 2016-12-13@09:44:11.440 [brltty] activity action request: braille-driver: start 2016-12-13@09:44:11.440 [brltty] activity state change: braille-driver: 4[preparing] 2016-12-13@09:44:11.440 [brltty] Braille Display Dimensions: 1 row, 1 column 2016-12-13@09:44:11.440 [brltty] regions: text=0.1 status=0.0 2016-12-13@09:44:11.440 [brltty] shifts: full=1 half=0 vertical=5 2016-12-13@09:44:11.440 [brltty] activity state change: braille-driver: 1[prepared] 2016-12-13@09:44:11.441 [brltty] activity state change: braille-driver: 2[scheduled] 2016-12-13@09:44:11.441 [brltty] program exit event added: speech-data 2016-12-13@09:44:11.441 [brltty] program exit event added: speech-driver 2016-12-13@09:44:11.441 [brltty] activity action request: speech-driver: start 2016-12-13@09:44:11.441 [brltty] activity state change: speech-driver: 4[preparing] 2016-12-13@09:44:11.441 [brltty] activity state change: speech-driver: 1[prepared] 2016-12-13@09:44:11.441 [brltty] activity state change: speech-driver: 2[scheduled] 2016-12-13@09:44:11.441 [brltty] Speech Input: keine 2016-12-13@09:44:11.441 [brltty] program exit event added: sessions 2016-12-13@09:44:11.441 [brltty] pushed command environment: main 2016-12-13@09:44:11.441 [brltty] pushed command handler: unhandled 2016-12-13@09:44:11.441 [brltty] pushed command handler: miscellaneous 2016-12-13@09:44:11.441 [brltty] pushed command handler: learn 2016-12-13@09:44:11.441 [brltty] pushed command handler: speech 2016-12-13@09:44:11.441 [brltty] pushed command handler: clipboard 2016-12-13@09:44:11.441 [brltty] pushed command handler: preferences 2016-12-13@09:44:11.441 [brltty] pushed command handler: toggle 2016-12-13@09:44:11.441 [brltty] report listener registered: 3: brailleWindowUpdatedListener 2016-12-13@09:44:11.442 [brltty] pushed command handler: touch 2016-12-13@09:44:11.442 [brltty] report listener registered: 0: keycodeCommandDataResetListener 2016-12-13@09:44:11.442 [brltty] pushed command handler: keycodes 2016-12-13@09:44:11.442 [brltty] report listener registered: 0: inputCommandDataResetListener 2016-12-13@09:44:11.442 [brltty] pushed command handler: input 2016-12-13@09:44:11.442 [brltty] pushed command handler: navigation 2016-12-13@09:44:11.442 [brltty] pushed command handler: screen 2016-12-13@09:44:11.442 [brltty] pushed command handler: custom 2016-12-13@09:44:11.442 [brltty] pushed command handler: API 2016-12-13@09:44:11.442 [brltty] activity state change: keyboard-monitor: 6[starting] 2016-12-13@09:44:11.442 [brltty] searching for keyboards 2016-12-13@09:44:11.443 [brltty] checking input device: event10: bus=0000 vnd=0000 prd=0000 ver=0000 tpl=ALSA nam=HDA Intel Headphone 2016-12-13@09:44:11.458 [brltty] checking input device: event9: bus=0000 vnd=0000 prd=0000 ver=0000 tpl=ALSA nam=HDA Intel Mic 2016-12-13@09:44:11.474 [brltty] checking input device: event8: bus=0003 vnd=0AC8 prd=C33F ver=0100 tpl=usb-0000:00:1d.7-8/button nam=WebCam SCB-0340N 2016-12-13@09:44:11.474 [brltty] starting host command: /sbin/modprobe -q uinput 2016-12-13@09:44:11.505 [brltty] host command exit status: 0: /sbin/modprobe 2016-12-13@09:44:11.506 [brltty] activity state change: screen-driver: 6[starting] 2016-12-13@09:44:11.506 [brltty] checking for screen driver: lx 2016-12-13@09:44:11.519 [brltty] initializing screen driver: lx 2016-12-13@09:44:11.519 [brltty] device directory: /dev 2016-12-13@09:44:11.519 [brltty] checking screen device: /dev/vcsa 2016-12-13@09:44:11.519 [brltty] screen device: vcsa 2016-12-13@09:44:11.519 [brltty] checking console device: /dev/tty0 2016-12-13@09:44:11.519 [brltty] console device: tty0 2016-12-13@09:44:11.519 [brltty] device opened: /dev/tty1: fd=17 2016-12-13@09:44:11.519 [brltty] device opened: /dev/vcsa: fd=18 2016-12-13@09:44:11.519 [brltty] checking uinput device: /dev/uinput 2016-12-13@09:44:11.519 [brltty] uinput device: uinput 2016-12-13@09:44:11.520 [brltty] device opened: /dev/uinput: fd=20 2016-12-13@09:44:11.520 [brltty] uinput opened: uinput fd=20 2016-12-13@09:44:11.521 [brltty] report listener registered: 1: lxBrailleOfflineListener 2016-12-13@09:44:11.521 [brltty] Bildschirmtreiber: lx [Linux] 2016-12-13@09:44:11.521 [brltty] Linux Screen Driver: 2016-12-13@09:44:11.521 [brltty] Bildschirm-Parameter: charset= 2016-12-13@09:44:11.522 [brltty] Bildschirm-Parameter: debugsfm= 2016-12-13@09:44:11.522 [brltty] Bildschirm-Parameter: hfb= 2016-12-13@09:44:11.522 [brltty] Bildschirm-Parameter: vt= 2016-12-13@09:44:11.522 [brltty] activity state change: screen-driver: 3[started] 2016-12-13@09:44:11.522 [brltty] activity state change: braille-driver: 6[starting] 2016-12-13@09:44:11.522 [brltty] checking braille device: usb: 2016-12-13@09:44:11.522 [brltty] performing braille driver autodetection 2016-12-13@09:44:11.522 [brltty] checking for braille driver: al 2016-12-13@09:44:11.523 [brltty] initializing braille driver: al -> usb: 2016-12-13@09:44:11.526 [brltty] Initialisierung des Brailletreibers fehlgeschlagen: al -> usb: 2016-12-13@09:44:11.526 [brltty] checking for braille driver: bm 2016-12-13@09:44:11.536 [brltty] initializing braille driver: bm -> usb: 2016-12-13@09:44:11.536 [brltty] Initialisierung des Brailletreibers fehlgeschlagen: bm -> usb: 2016-12-13@09:44:11.536 [brltty] checking for braille driver: bn 2016-12-13@09:44:11.537 [brltty] initializing braille driver: bn -> usb: 2016-12-13@09:44:11.537 [brltty] Initialisierung des Brailletreibers fehlgeschlagen: bn -> usb: 2016-12-13@09:44:11.537 [brltty] checking for braille driver: eu 2016-12-13@09:44:11.538 [brltty] initializing braille driver: eu -> usb: 2016-12-13@09:44:11.538 [brltty] Initialisierung des Brailletreibers fehlgeschlagen: eu -> usb: 2016-12-13@09:44:11.538 [brltty] checking for braille driver: fs 2016-12-13@09:44:11.539 [brltty] initializing braille driver: fs -> usb: 2016-12-13@09:44:11.539 [brltty] Initialisierung des Brailletreibers fehlgeschlagen: fs -> usb: 2016-12-13@09:44:11.539 [brltty] checking for braille driver: hd 2016-12-13@09:44:11.540 [brltty] initializing braille driver: hd -> usb: 2016-12-13@09:44:11.547 [brltty] USB: Manufacturer Name: Hedo Reha Technik GmbH 2016-12-13@09:44:11.550 [brltty] USB: Product Description: MobilLine USB 2016-12-13@09:44:11.553 [brltty] USB: Serial Number: ML-I-006 2016-12-13@09:44:11.558 [brltty] program exit event added: sorted-usb-serial-adapters 2016-12-13@09:44:11.564 [brltty] activity state change: speech-driver: 6[starting] 2016-12-13@09:44:11.564 [brltty] checking for speech driver: es 2016-12-13@09:44:11.637 [brltty] initializing speech driver: es 2016-12-13@09:44:11.637 [brltty] speech: driver thread constructing 2016-12-13@09:44:11.638 [speech-driver] speech: driver thread starting 2016-12-13@09:44:11.638 [speech-driver] speech: starting driver 2016-12-13@09:44:11.638 [brltty] device opened: /dev/tty0: fd=28 2016-12-13@09:44:11.638 [speech-driver] eSpeak version 1.48.15 16.Apr.15 2016-12-13@09:44:11.921 [speech-driver] speech: driver thread ready 2016-12-13@09:44:11.921 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:11.921 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:11.922 [brltty] Sprachausgabentreiber: es [eSpeak] 2016-12-13@09:44:11.922 [brltty] eSpeak Speech Driver: version 0.3 2016-12-13@09:44:11.922 [brltty] Sprachausgaben-Parameter: path= 2016-12-13@09:44:11.922 [brltty] Sprachausgaben-Parameter: punctlist= 2016-12-13@09:44:11.922 [brltty] Sprachausgaben-Parameter: voice=de 2016-12-13@09:44:11.922 [brltty] Sprachausgaben-Parameter: maxrate= 2016-12-13@09:44:11.922 [brltty] speech: set volume: 10 2016-12-13@09:44:11.922 [brltty] speech: enqueuing speech request: set volume 2016-12-13@09:44:11.922 [brltty] speech: sending speech request: set volume 2016-12-13@09:44:11.922 [brltty] speech: set rate: 10 2016-12-13@09:44:11.922 [speech-driver] speech: handling speech request: set volume 2016-12-13@09:44:11.922 [brltty] speech: enqueuing speech request: set rate 2016-12-13@09:44:11.922 [brltty] speech: set pitch: 10 2016-12-13@09:44:11.922 [brltty] speech: enqueuing speech request: set pitch 2016-12-13@09:44:11.922 [brltty] speech: set punctuation: 1 2016-12-13@09:44:11.922 [brltty] speech: enqueuing speech request: set punctuation 2016-12-13@09:44:11.922 [brltty] speech: say: BRLTTY 5.4 rev BRLTTY-5.4 2016-12-13@09:44:11.922 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:11.922 [brltty] activity state change: speech-driver: 3[started] 2016-12-13@09:44:11.922 [brltty] Short Packet: 00 2016-12-13@09:44:11.922 [brltty] Short Packet: 00 2016-12-13@09:44:11.922 [brltty] Short Packet: 00 2016-12-13@09:44:11.922 [brltty] Short Packet: 00 2016-12-13@09:44:11.922 [brltty] Short Packet: 00 2016-12-13@09:44:11.922 [brltty] Short Packet: 00 2016-12-13@09:44:11.923 [brltty] Short Packet: 00 2016-12-13@09:44:11.923 [brltty] Short Packet: 00 2016-12-13@09:44:11.923 [brltty] Short Packet: 00 2016-12-13@09:44:11.923 [brltty] Short Packet: 00 2016-12-13@09:44:11.923 [brltty] Short Packet: 00 2016-12-13@09:44:11.923 [brltty] Short Packet: 00 2016-12-13@09:44:11.923 [brltty] Short Packet: 00 2016-12-13@09:44:11.923 [brltty] Short Packet: 00 2016-12-13@09:44:11.923 [brltty] Short Packet: 00 2016-12-13@09:44:11.923 [brltty] Short Packet: 00 2016-12-13@09:44:11.923 [brltty] Short Packet: 00 2016-12-13@09:44:11.923 [brltty] Short Packet: 00 2016-12-13@09:44:11.923 [brltty] Short Packet: 00 2016-12-13@09:44:11.923 [brltty] Short Packet: 00 2016-12-13@09:44:11.923 [brltty] Short Packet: 00 2016-12-13@09:44:11.923 [brltty] Short Packet: 00 2016-12-13@09:44:11.923 [brltty] Short Packet: 00 2016-12-13@09:44:11.923 [brltty] Short Packet: 00 2016-12-13@09:44:11.923 [brltty] Short Packet: 00 2016-12-13@09:44:11.923 [brltty] Short Packet: 00 2016-12-13@09:44:11.923 [brltty] Short Packet: 00 2016-12-13@09:44:11.923 [brltty] Short Packet: 00 2016-12-13@09:44:11.923 [brltty] Short Packet: 00 2016-12-13@09:44:11.923 [brltty] Braille Display Dimensions: 1 row, 40 columns 2016-12-13@09:44:11.923 [brltty] regions: text=0.40 status=0.0 2016-12-13@09:44:11.923 [brltty] shifts: full=40 half=20 vertical=5 2016-12-13@09:44:11.923 [brltty] Tastenbelegungen: mbl 2016-12-13@09:44:11.931 [brltty] file opened: /etc/brltty/Input/hd/mbl.ktb fd=29 2016-12-13@09:44:11.931 [brltty] including data file: /etc/brltty/Input/hd/mbl.ktb 2016-12-13@09:44:11.947 [brltty] file opened: /etc/brltty/Input/hd/../toggle.kti fd=30 2016-12-13@09:44:11.947 [brltty] including data file: /etc/brltty/Input/hd/../toggle.kti 2016-12-13@09:44:11.956 [brltty] file opened: /etc/brltty/Input/hd/../toggle.kti fd=30 2016-12-13@09:44:11.956 [brltty] including data file: /etc/brltty/Input/hd/../toggle.kti 2016-12-13@09:44:11.956 [brltty] file opened: /etc/brltty/Input/hd/../toggle.kti fd=30 2016-12-13@09:44:11.956 [brltty] including data file: /etc/brltty/Input/hd/../toggle.kti 2016-12-13@09:44:11.956 [brltty] file opened: /etc/brltty/Input/hd/../toggle.kti fd=30 2016-12-13@09:44:11.956 [brltty] including data file: /etc/brltty/Input/hd/../toggle.kti 2016-12-13@09:44:11.956 [brltty] file opened: /etc/brltty/Input/hd/../toggle.kti fd=30 2016-12-13@09:44:11.956 [brltty] including data file: /etc/brltty/Input/hd/../toggle.kti 2016-12-13@09:44:11.957 [brltty] file opened: /etc/brltty/Input/hd/../toggle.kti fd=30 2016-12-13@09:44:11.957 [brltty] including data file: /etc/brltty/Input/hd/../toggle.kti 2016-12-13@09:44:11.957 [brltty] Tastentabelle: /etc/brltty/Input/hd/mbl.ktb 2016-12-13@09:44:11.958 [brltty] report listener registered: 0: brlapi_handleReports 2016-12-13@09:44:11.958 [brltty] Brailletreiber: hd [Hedo] 2016-12-13@09:44:11.959 [brltty] Hedo Braille Driver: 2016-12-13@09:44:11.959 [brltty] Braillegerät: usb: 2016-12-13@09:44:11.959 [brltty] Alte Einstellungsdatei: /etc/brltty-hd.prefs 2016-12-13@09:44:11.959 [brltty] cannot open file: /etc/brltty-hd.prefs: Datei oder Verzeichnis nicht gefunden 2016-12-13@09:44:11.959 [brltty] regions: text=0.40 status=0.0 2016-12-13@09:44:11.959 [brltty] shifts: full=40 half=20 vertical=5 2016-12-13@09:44:11.959 [brltty] speech: set volume: 10 2016-12-13@09:44:11.959 [brltty] speech: enqueuing speech request: set volume 2016-12-13@09:44:11.959 [brltty] speech: set rate: 10 2016-12-13@09:44:11.959 [brltty] speech: enqueuing speech request: set rate 2016-12-13@09:44:11.959 [brltty] speech: set pitch: 10 2016-12-13@09:44:11.959 [brltty] speech: enqueuing speech request: set pitch 2016-12-13@09:44:11.959 [brltty] speech: set punctuation: 1 2016-12-13@09:44:11.959 [brltty] speech: enqueuing speech request: set punctuation 2016-12-13@09:44:11.959 [brltty] program exit event added: alert-tunes 2016-12-13@09:44:11.959 [brltty] activity state change: braille-driver: 3[started] 2016-12-13@09:44:11.959 [tune-thread] starting host command: /sbin/modprobe -q pcspkr 2016-12-13@09:44:11.963 [tune-thread] host command exit status: 0: /sbin/modprobe 2016-12-13@09:44:11.964 [tune-thread] console opened: fd=29 2016-12-13@09:44:11.964 [tune-thread] program exit event added: console-stream 2016-12-13@09:44:11.964 [tune-thread] beeper enabled 2016-12-13@09:44:11.964 [tune-thread] tone: MSecs:60 Freq:329 2016-12-13@09:44:11.972 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:11.972 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:11.972 [brltty] speech: sending speech request: set rate 2016-12-13@09:44:11.973 [speech-driver] speech: handling speech request: set rate 2016-12-13@09:44:12.013 [brltty] checking uinput device: /dev/uinput 2016-12-13@09:44:12.014 [brltty] uinput device: uinput 2016-12-13@09:44:12.014 [brltty] device opened: /dev/uinput: fd=30 2016-12-13@09:44:12.014 [brltty] uinput opened: uinput fd=30 2016-12-13@09:44:12.023 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:12.025 [tune-thread] tone: MSecs:100 Freq:440 2016-12-13@09:44:12.078 [brltty] checking input device: event7: bus=0019 vnd=0000 prd=0006 ver=0000 tpl=LNXVIDEO/video/input0 nam=Video Bus 2016-12-13@09:44:12.094 [brltty] checking input device: event6: bus=0010 vnd=001F prd=0001 ver=0100 tpl=isa0061/input0 nam=PC Speaker 2016-12-13@09:44:12.130 [brltty] checking input device: event5: bus=0019 vnd=0000 prd=0001 ver=0000 tpl=LNXPWRBN/button/input0 nam=Power Button 2016-12-13@09:44:12.146 [brltty] checking input device: event4: bus=0019 vnd=0000 prd=0003 ver=0000 tpl=PNP0C0E/button/input0 nam=Sleep Button 2016-12-13@09:44:12.166 [brltty] checking input device: event3: bus=0019 vnd=0000 prd=0001 ver=0000 tpl=PNP0C0C/button/input0 nam=Power Button 2016-12-13@09:44:12.182 [brltty] checking input device: event2: bus=0019 vnd=0000 prd=0005 ver=0000 tpl=PNP0C0D/button/input0 nam=Lid Switch 2016-12-13@09:44:12.198 [brltty] checking input device: event1: bus=0011 vnd=0002 prd=000E ver=0000 tpl=isa0060/serio1/input0 nam=ETPS/2 Elantech Touchpad 2016-12-13@09:44:12.198 [brltty] checking uinput device: /dev/uinput 2016-12-13@09:44:12.198 [brltty] uinput device: uinput 2016-12-13@09:44:12.198 [brltty] device opened: /dev/uinput: fd=30 2016-12-13@09:44:12.198 [brltty] uinput opened: uinput fd=30 2016-12-13@09:44:12.262 [brltty] checking input device: event0: bus=0011 vnd=0001 prd=0001 ver=AB41 tpl=isa0060/serio0/input0 nam=AT Translated Set 2 keyboard 2016-12-13@09:44:12.262 [brltty] checking uinput device: /dev/uinput 2016-12-13@09:44:12.262 [brltty] uinput device: uinput 2016-12-13@09:44:12.262 [brltty] device opened: /dev/uinput: fd=30 2016-12-13@09:44:12.262 [brltty] uinput opened: uinput fd=30 2016-12-13@09:44:12.265 [brltty] keyboard opened: /dev/input/event0: fd=19 2016-12-13@09:44:12.265 [brltty] checking input device: mouse0: 2016-12-13@09:44:12.294 [brltty] checking input device: mice: 2016-12-13@09:44:12.330 [brltty] keyboard search complete 2016-12-13@09:44:12.330 [brltty] activity state change: keyboard-monitor: 3[started] 2016-12-13@09:44:12.330 [brltty] report listener unregistered: 0: brlapi_handleReports 2016-12-13@09:44:12.330 [brltty] pushed command environment: message 2016-12-13@09:44:12.330 [brltty] pushed command handler: message 2016-12-13@09:44:12.330 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:12.331 [brltty] speech: sending speech request: set pitch 2016-12-13@09:44:12.331 [speech-driver] speech: handling speech request: set pitch 2016-12-13@09:44:12.381 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:12.381 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:12.381 [brltty] speech: sending speech request: set punctuation 2016-12-13@09:44:12.382 [speech-driver] speech: handling speech request: set punctuation 2016-12-13@09:44:12.432 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:12.432 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:12.432 [brltty] speech: sending speech request: say text 2016-12-13@09:44:12.432 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:12.482 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:12.483 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:12.483 [brltty] speech: sending speech request: set volume 2016-12-13@09:44:12.483 [speech-driver] speech: handling speech request: set volume 2016-12-13@09:44:12.483 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:12.483 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:12.483 [brltty] speech: sending speech request: set rate 2016-12-13@09:44:12.483 [speech-driver] speech: handling speech request: set rate 2016-12-13@09:44:12.483 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:12.483 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:12.483 [brltty] speech: sending speech request: set pitch 2016-12-13@09:44:12.483 [speech-driver] speech: handling speech request: set pitch 2016-12-13@09:44:12.483 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:12.483 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:12.483 [brltty] speech: sending speech request: set punctuation 2016-12-13@09:44:12.484 [speech-driver] speech: handling speech request: set punctuation 2016-12-13@09:44:12.484 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:12.484 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:14.048 [tune-thread] beeper disabled 2016-12-13@09:44:14.936 [brltty] program exit event added: command-queue 2016-12-13@09:44:14.936 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:14.936 [brltty] popped command handler: message 2016-12-13@09:44:14.936 [brltty] popped command environment: message 2016-12-13@09:44:14.936 [brltty] report listener registered: 0: brlapi_handleReports 2016-12-13@09:44:15.032 [brltty] command: 000030 (AUTOSPEAK: schalte automatisches Sprechen ein/aus) 2016-12-13@09:44:15.032 [tune-thread] beeper enabled 2016-12-13@09:44:15.032 [tune-thread] tone: MSecs:30 Freq:587 2016-12-13@09:44:15.064 [tune-thread] tone: MSecs:30 Freq:0 2016-12-13@09:44:15.094 [tune-thread] tone: MSecs:30 Freq:783 2016-12-13@09:44:15.125 [tune-thread] tone: MSecs:30 Freq:0 2016-12-13@09:44:15.156 [tune-thread] tone: MSecs:30 Freq:1174 2016-12-13@09:44:15.814 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:15.814 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:15.814 [brltty] speech: autospeak: current line: [0,21] 0.128 2016-12-13@09:44:15.814 [brltty] speech: say: swannie@kleiner ~ :-) % 2016-12-13@09:44:15.814 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:15.814 [brltty] speech: sending speech request: say text 2016-12-13@09:44:15.814 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:15.864 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:15.865 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:17.171 [tune-thread] beeper disabled 2016-12-13@09:44:17.382 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:17.382 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:17.407 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:17.422 [brltty] speech: autospeak: characters inserted before cursor: [0,21] 24.1 2016-12-13@09:44:17.422 [brltty] speech: say: v 2016-12-13@09:44:17.422 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:17.422 [brltty] speech: sending speech request: say text 2016-12-13@09:44:17.422 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:17.472 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:17.473 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:17.533 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:17.536 [brltty] speech: autospeak: characters inserted before cursor: [0,21] 25.1 2016-12-13@09:44:17.536 [brltty] speech: say: i 2016-12-13@09:44:17.536 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:17.536 [brltty] speech: sending speech request: say text 2016-12-13@09:44:17.537 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:17.640 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:17.640 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:17.690 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:17.690 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:17.718 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:17.734 [brltty] speech: autospeak: characters inserted before cursor: [0,21] 26.1 2016-12-13@09:44:17.734 [brltty] speech: say: m 2016-12-13@09:44:17.734 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:17.734 [brltty] speech: sending speech request: say text 2016-12-13@09:44:17.734 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:17.790 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:17.790 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:17.841 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:17.841 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:17.899 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:17.915 [brltty] speech: autospeak: line selected: [0,22] 0.128 2016-12-13@09:44:17.983 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:17.984 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:18.351 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:18.366 [brltty] speech: autospeak: characters inserted before cursor: [0,22] 0.1 2016-12-13@09:44:18.366 [brltty] speech: say: i 2016-12-13@09:44:18.366 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:18.366 [brltty] speech: sending speech request: say text 2016-12-13@09:44:18.366 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:18.416 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:18.417 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:18.520 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:18.520 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:18.562 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:18.653 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:18.667 [brltty] speech: autospeak: line selected: [0,0] 0.128 2016-12-13@09:44:18.718 [brltty] speech: autospeak: characters inserted before cursor: [0,0] 0.1 2016-12-13@09:44:18.719 [brltty] speech: say: T 2016-12-13@09:44:18.719 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:18.719 [brltty] speech: sending speech request: say text 2016-12-13@09:44:18.719 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:18.769 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:18.769 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:18.927 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:19.046 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:19.235 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:19.252 [brltty] speech: autospeak: characters deleted before cursor: [0,0] 0.1 2016-12-13@09:44:19.252 [brltty] speech: say: T 2016-12-13@09:44:19.252 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:19.252 [brltty] speech: sending speech request: say text 2016-12-13@09:44:19.252 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:19.303 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:19.303 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:19.401 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:19.463 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:19.464 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:19.576 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:19.722 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:19.933 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:20.028 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:20.043 [brltty] speech: autospeak: characters inserted before cursor: [0,0] 0.1 2016-12-13@09:44:20.043 [brltty] speech: say: T 2016-12-13@09:44:20.043 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:20.043 [brltty] speech: sending speech request: say text 2016-12-13@09:44:20.043 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:20.094 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:20.094 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:20.199 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:20.214 [brltty] speech: autospeak: characters inserted before cursor: [0,0] 1.1 2016-12-13@09:44:20.214 [brltty] speech: say: h 2016-12-13@09:44:20.214 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:20.214 [brltty] speech: sending speech request: say text 2016-12-13@09:44:20.214 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:20.235 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:20.235 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:20.286 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:20.286 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:20.329 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:20.345 [brltty] speech: autospeak: characters inserted before cursor: [0,0] 2.1 2016-12-13@09:44:20.345 [brltty] speech: say: i 2016-12-13@09:44:20.345 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:20.345 [brltty] speech: sending speech request: say text 2016-12-13@09:44:20.345 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:20.471 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:20.471 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:20.494 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:20.499 [brltty] speech: autospeak: characters inserted before cursor: [0,0] 3.1 2016-12-13@09:44:20.499 [brltty] speech: say: s 2016-12-13@09:44:20.499 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:20.521 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:20.521 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:20.521 [brltty] speech: sending speech request: say text 2016-12-13@09:44:20.521 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:20.621 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:20.621 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:20.625 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:20.635 [brltty] speech: autospeak: word appended: [0,0] 0.4 2016-12-13@09:44:20.635 [brltty] speech: say: This 2016-12-13@09:44:20.635 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:20.671 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:20.671 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:20.671 [brltty] speech: sending speech request: say text 2016-12-13@09:44:20.671 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:20.756 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:20.771 [brltty] speech: autospeak: characters inserted before cursor: [0,0] 5.1 2016-12-13@09:44:20.771 [brltty] speech: say: i 2016-12-13@09:44:20.771 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:20.792 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:20.792 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:20.842 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:20.843 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:20.843 [brltty] speech: sending speech request: say text 2016-12-13@09:44:20.843 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:20.871 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:20.886 [brltty] speech: autospeak: characters inserted before cursor: [0,0] 6.1 2016-12-13@09:44:20.886 [brltty] speech: say: s 2016-12-13@09:44:20.886 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:20.971 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:20.986 [brltty] speech: autospeak: word appended: [0,0] 5.2 2016-12-13@09:44:20.986 [brltty] speech: say: is 2016-12-13@09:44:20.986 [brltty] speech: unqueuing speech request: say text 2016-12-13@09:44:20.986 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:21.049 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:21.049 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:21.100 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:21.100 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:21.100 [brltty] speech: sending speech request: say text 2016-12-13@09:44:21.100 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:21.172 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:21.187 [brltty] speech: autospeak: characters inserted before cursor: [0,0] 8.1 2016-12-13@09:44:21.187 [brltty] speech: say: v 2016-12-13@09:44:21.187 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:21.199 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:21.199 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:21.250 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:21.250 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:21.250 [brltty] speech: sending speech request: say text 2016-12-13@09:44:21.250 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:21.343 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:21.361 [brltty] speech: autospeak: characters inserted before cursor: [0,0] 9.1 2016-12-13@09:44:21.361 [brltty] speech: say: e 2016-12-13@09:44:21.361 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:21.413 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:21.414 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:21.418 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:21.433 [brltty] speech: autospeak: characters inserted before cursor: [0,0] 10.1 2016-12-13@09:44:21.433 [brltty] speech: say: r 2016-12-13@09:44:21.433 [brltty] speech: unqueuing speech request: say text 2016-12-13@09:44:21.433 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:21.464 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:21.464 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:21.464 [brltty] speech: sending speech request: say text 2016-12-13@09:44:21.464 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:21.598 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:21.614 [brltty] speech: autospeak: characters inserted before cursor: [0,0] 11.1 2016-12-13@09:44:21.614 [brltty] speech: say: y 2016-12-13@09:44:21.614 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:21.649 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:21.649 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:21.699 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:21.699 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:21.699 [brltty] speech: sending speech request: say text 2016-12-13@09:44:21.699 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:21.738 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:21.753 [brltty] speech: autospeak: word appended: [0,0] 8.4 2016-12-13@09:44:21.753 [brltty] speech: say: very 2016-12-13@09:44:21.753 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:21.777 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:21.778 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:21.828 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:21.828 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:21.828 [brltty] speech: sending speech request: say text 2016-12-13@09:44:21.828 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:21.979 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:21.995 [brltty] speech: autospeak: characters inserted before cursor: [0,0] 13.1 2016-12-13@09:44:21.995 [brltty] speech: say: m 2016-12-13@09:44:21.995 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:22.120 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:22.135 [brltty] speech: autospeak: characters inserted before cursor: [0,0] 14.1 2016-12-13@09:44:22.135 [brltty] speech: say: o 2016-12-13@09:44:22.135 [brltty] speech: unqueuing speech request: say text 2016-12-13@09:44:22.135 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:22.184 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:22.184 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:22.234 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:22.235 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:22.235 [brltty] speech: sending speech request: say text 2016-12-13@09:44:22.235 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:22.255 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:22.270 [brltty] speech: autospeak: characters inserted before cursor: [0,0] 15.1 2016-12-13@09:44:22.270 [brltty] speech: say: n 2016-12-13@09:44:22.270 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:22.391 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:22.406 [brltty] speech: autospeak: characters inserted before cursor: [0,0] 16.1 2016-12-13@09:44:22.406 [brltty] speech: say: o 2016-12-13@09:44:22.406 [brltty] speech: unqueuing speech request: say text 2016-12-13@09:44:22.406 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:22.556 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:22.575 [brltty] speech: autospeak: characters inserted before cursor: [0,0] 17.1 2016-12-13@09:44:22.575 [brltty] speech: say: t 2016-12-13@09:44:22.575 [brltty] speech: unqueuing speech request: say text 2016-12-13@09:44:22.575 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:22.612 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:22.612 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:22.663 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:22.663 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:22.663 [brltty] speech: sending speech request: say text 2016-12-13@09:44:22.663 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:22.762 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:22.762 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:22.812 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:22.812 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:22.944 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:22.959 [brltty] speech: autospeak: characters inserted before cursor: [0,0] 18.1 2016-12-13@09:44:22.959 [brltty] speech: say: o 2016-12-13@09:44:22.959 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:22.959 [brltty] speech: sending speech request: say text 2016-12-13@09:44:22.960 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:22.976 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:22.976 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:23.026 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:23.027 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:23.126 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:23.126 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:23.128 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:23.149 [brltty] speech: autospeak: characters inserted before cursor: [0,0] 19.1 2016-12-13@09:44:23.149 [brltty] speech: say: n 2016-12-13@09:44:23.149 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:23.150 [brltty] speech: sending speech request: say text 2016-12-13@09:44:23.150 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:23.200 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:23.200 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:23.249 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:23.269 [brltty] speech: autospeak: characters inserted before cursor: [0,0] 20.1 2016-12-13@09:44:23.270 [brltty] speech: say: o 2016-12-13@09:44:23.270 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:23.270 [brltty] speech: sending speech request: say text 2016-12-13@09:44:23.270 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:23.340 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:23.340 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:23.379 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:23.390 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:23.390 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:23.394 [brltty] speech: autospeak: characters inserted before cursor: [0,0] 21.1 2016-12-13@09:44:23.394 [brltty] speech: say: u 2016-12-13@09:44:23.394 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:23.394 [brltty] speech: sending speech request: say text 2016-12-13@09:44:23.394 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:23.490 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:23.490 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:23.540 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:23.540 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:23.574 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:23.589 [brltty] speech: autospeak: characters inserted before cursor: [0,0] 22.1 2016-12-13@09:44:23.589 [brltty] speech: say: s 2016-12-13@09:44:23.589 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:23.589 [brltty] speech: sending speech request: say text 2016-12-13@09:44:23.589 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:23.639 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:23.639 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:23.690 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:23.690 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:23.810 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:23.811 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:24.116 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:24.131 [brltty] speech: autospeak: line selected: [0,1] 0.128 2016-12-13@09:44:24.831 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:24.845 [brltty] speech: autospeak: line selected: [0,0] 0.128 2016-12-13@09:44:24.845 [brltty] speech: say: This is very monotonous 2016-12-13@09:44:24.845 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:24.845 [brltty] speech: sending speech request: say text 2016-12-13@09:44:24.846 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:24.896 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:24.896 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:26.175 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:26.205 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:26.206 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:26.697 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:27.037 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:27.053 [brltty] speech: autospeak: line selected: [0,36] 0.128 2016-12-13@09:44:27.053 [brltty] speech: say: : 2016-12-13@09:44:27.053 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:27.053 [brltty] speech: sending speech request: say text 2016-12-13@09:44:27.053 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:27.104 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:27.104 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:27.105 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:27.105 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:27.584 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:27.600 [brltty] speech: autospeak: characters inserted before cursor: [0,36] 1.1 2016-12-13@09:44:27.600 [brltty] speech: say: q 2016-12-13@09:44:27.600 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:27.600 [brltty] speech: sending speech request: say text 2016-12-13@09:44:27.600 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:27.650 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:27.650 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:27.808 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:27.808 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:28.145 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:28.160 [brltty] speech: autospeak: line selected: [0,0] 0.128 2016-12-13@09:44:28.160 [brltty] speech: say: This is very monotonous 2016-12-13@09:44:28.160 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:28.160 [brltty] speech: sending speech request: say text 2016-12-13@09:44:28.160 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:28.210 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:28.211 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:29.321 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:29.517 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:29.518 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:29.542 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:29.559 [brltty] speech: autospeak: line selected: [0,36] 0.128 2016-12-13@09:44:29.559 [brltty] speech: say: : 2016-12-13@09:44:29.559 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:29.559 [brltty] speech: sending speech request: say text 2016-12-13@09:44:29.559 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:29.610 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:29.610 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:29.611 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:29.611 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:29.830 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:29.845 [brltty] speech: autospeak: characters inserted before cursor: [0,36] 1.1 2016-12-13@09:44:29.845 [brltty] speech: say: q 2016-12-13@09:44:29.845 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:29.845 [brltty] speech: sending speech request: say text 2016-12-13@09:44:29.845 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:29.896 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:29.896 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:30.014 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:30.051 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:30.052 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:30.214 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:30.231 [brltty] speech: autospeak: characters inserted before cursor: [0,36] 2.1 2016-12-13@09:44:30.231 [brltty] speech: say: ! 2016-12-13@09:44:30.231 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:30.231 [brltty] speech: sending speech request: say text 2016-12-13@09:44:30.231 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:30.331 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:30.332 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:30.714 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:30.728 [brltty] speech: autospeak: character selected: [0,36] 0.1 2016-12-13@09:44:30.729 [brltty] speech: say: : 2016-12-13@09:44:30.729 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:30.729 [brltty] speech: sending speech request: say text 2016-12-13@09:44:30.729 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:30.780 [brltty] speech: autospeak: characters replaced: [0,36] 0.23 2016-12-13@09:44:30.780 [brltty] speech: say: swannie@kleiner ~ :-) % 2016-12-13@09:44:30.780 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:30.906 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:30.906 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:31.006 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:31.007 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:31.007 [brltty] speech: sending speech request: say text 2016-12-13@09:44:31.007 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:31.183 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:31.184 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:31.234 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:31.234 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:31.662 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:31.677 [brltty] speech: autospeak: characters inserted before cursor: [0,36] 24.1 2016-12-13@09:44:31.677 [brltty] speech: say: k 2016-12-13@09:44:31.677 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:31.677 [brltty] speech: sending speech request: say text 2016-12-13@09:44:31.677 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:32.016 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:32.016 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:32.057 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:32.067 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:32.067 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:32.073 [brltty] speech: autospeak: characters deleted before cursor: [0,36] 24.1 2016-12-13@09:44:32.073 [brltty] speech: say: k 2016-12-13@09:44:32.073 [brltty] speech: enqueuing speech request: say text 2016-12-13@09:44:32.073 [brltty] speech: sending speech request: say text 2016-12-13@09:44:32.073 [speech-driver] speech: handling speech request: say text 2016-12-13@09:44:32.203 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:32.251 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:32.251 [brltty] speech: handling speech message: speech finished 2016-12-13@09:44:32.302 [speech-driver] speech: sending speech message: request finished 2016-12-13@09:44:32.302 [brltty] speech: handling speech message: request finished 2016-12-13@09:44:32.363 [brltty] command: 000000 (NOOP: nichts unternehmen) 2016-12-13@09:44:32.486 [speech-driver] speech: sending speech message: speech finished 2016-12-13@09:44:32.486 [brltty] speech: handling speech message: speech finished
--- End Message ---
--- Begin Message ---Source: espeak-ng Source-Version: 1.49.0+dfsg-3 We believe that the bug you reported is fixed in the latest version of espeak-ng, which is due to be installed in the Debian FTP archive. A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to [email protected], and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Samuel Thibault <[email protected]> (supplier of updated espeak-ng package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing [email protected]) -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 1.8 Date: Mon, 26 Dec 2016 16:11:13 +0100 Source: espeak-ng Binary: espeak-ng espeak-ng-espeak espeak-ng-data espeak-ng-data-udeb libespeak-ng1 libespeak-ng-libespeak1 libespeak-ng-dev libespeak-ng-libespeak-dev Architecture: source amd64 Version: 1.49.0+dfsg-3 Distribution: unstable Urgency: medium Maintainer: Debian Accessibility Team <[email protected]> Changed-By: Samuel Thibault <[email protected]> Description: espeak-ng - Multi-lingual software speech synthesizer espeak-ng-data - Multi-lingual software speech synthesizer: speech data files espeak-ng-data-udeb - Multi-lingual software speech synthesizer: data for d-i (udeb) espeak-ng-espeak - Multi-lingual software speech synthesizer libespeak-ng-dev - Multi-lingual software speech synthesizer: development files libespeak-ng-libespeak-dev - Multi-lingual software speech synthesizer: development files libespeak-ng-libespeak1 - Multi-lingual software speech synthesizer: shared library libespeak-ng1 - Multi-lingual software speech synthesizer: shared library Closes: 848016 Changes: espeak-ng (1.49.0+dfsg-3) unstable; urgency=medium . * patches/reproducible: Make build reproducible by fixing uninitialized values. * patches/git-reactivity: cherry-pick upstream fix for reactivity (Closes: Bug#848016) Checksums-Sha1: 0333ec5f4fc6207ce7dc9ef03366bb8b61062822 2547 espeak-ng_1.49.0+dfsg-3.dsc f3063ee75fc4aaa26d90a7c05e441312464bd11d 10768 espeak-ng_1.49.0+dfsg-3.debian.tar.xz d61ae0730d8d065c472077cc215c79be3636c765 2471908 espeak-ng-data-udeb_1.49.0+dfsg-3_amd64.udeb c76972251a1bc84cddcc1da521c87309e813e551 2462908 espeak-ng-data_1.49.0+dfsg-3_amd64.deb 331f2fb97f9cb77a463cb4834c0d18c49341c794 385416 espeak-ng-dbgsym_1.49.0+dfsg-3_amd64.deb 9aafde96426413bd486e20a13cce741347046c05 9364 espeak-ng-espeak_1.49.0+dfsg-3_amd64.deb cfe34bbe85bc770869d8ec6e33b99022cc076cb6 9091 espeak-ng_1.49.0+dfsg-3_amd64.buildinfo 672fdafba714469b6b1f0ffca082f87cd65a8825 242826 espeak-ng_1.49.0+dfsg-3_amd64.deb 10d9a414d68649b5b6fc9978b1dd5b6860149999 199060 libespeak-ng-dev_1.49.0+dfsg-3_amd64.deb eeda85e4cea78b24f03e22edabbae960aad4833a 16266 libespeak-ng-libespeak-dev_1.49.0+dfsg-3_amd64.deb 8693e97afaba54fc00d962bf1c7cb02011b605ff 9346 libespeak-ng-libespeak1_1.49.0+dfsg-3_amd64.deb 846be1e209b33730a59ffa2789d53cab7150e27f 362870 libespeak-ng1-dbgsym_1.49.0+dfsg-3_amd64.deb dae79980ed96b0b6dea1df0301d3895e5fc92df4 166222 libespeak-ng1_1.49.0+dfsg-3_amd64.deb Checksums-Sha256: 72ab05ea89f8845b7649a74f41487182880f83b599537b146316f34872b80ff3 2547 espeak-ng_1.49.0+dfsg-3.dsc 98c63f31dd82c1434fe44dd7e202a504d2e53862e328b9d911debffb8140e17f 10768 espeak-ng_1.49.0+dfsg-3.debian.tar.xz 58e140595cb79516050ecaabc0125f0f9de4488a075b6605a917ceba4b9d528b 2471908 espeak-ng-data-udeb_1.49.0+dfsg-3_amd64.udeb 24d83fbf53304dd5bed74923e446954fdbaed9f3a4c4898bb6e2a7c3f525039f 2462908 espeak-ng-data_1.49.0+dfsg-3_amd64.deb 0a837ee030aa853ec62537ec1658f61bc3684daac0522f52d9ca563b5f1b71d9 385416 espeak-ng-dbgsym_1.49.0+dfsg-3_amd64.deb a2612d4c4dcb4477c11dcdebf7ed7c07b33ad3b35f0899994e81d5e645a85904 9364 espeak-ng-espeak_1.49.0+dfsg-3_amd64.deb 9ec3a916ced771361a351c5e159bc2870655cd3ad2a3559f837a5cb1494aa839 9091 espeak-ng_1.49.0+dfsg-3_amd64.buildinfo 50c5afa58d9ef110770c85db4aad2cf8697b6d279e70ce0e99d0e1c9d1e75625 242826 espeak-ng_1.49.0+dfsg-3_amd64.deb 4d7303a25d20b0862f1e7997834f4a72edf87f4f8b94752fb8ba7bf3b44d5618 199060 libespeak-ng-dev_1.49.0+dfsg-3_amd64.deb f198824ae80990c3866c5d14fb555a375762ffff5e0f463b60a10c9476efe41e 16266 libespeak-ng-libespeak-dev_1.49.0+dfsg-3_amd64.deb 516e47a08a40b3229e183c2ab2f6cc6c0d8b0a7b8fc97df75c2b80e1c4dd97a3 9346 libespeak-ng-libespeak1_1.49.0+dfsg-3_amd64.deb 5fb8015ee2724f1f48b2ac341d59e80c28397a3d816195c918a29c30938a89f3 362870 libespeak-ng1-dbgsym_1.49.0+dfsg-3_amd64.deb 7dc39c3c9bd48d08a08cad208cd0ccb1a9e8ba4e85668423ba2c36ba0f9dfc31 166222 libespeak-ng1_1.49.0+dfsg-3_amd64.deb Files: 06cca08fa130dbde90f3b3411c4ae086 2547 sound optional espeak-ng_1.49.0+dfsg-3.dsc adcd96ac233eaccf51cf649fa2907582 10768 sound optional espeak-ng_1.49.0+dfsg-3.debian.tar.xz 23253dcfbfc73ab2f0ee4036956d9bda 2471908 debian-installer optional espeak-ng-data-udeb_1.49.0+dfsg-3_amd64.udeb c48b591f50722ffce9cc1a2862c914ef 2462908 sound optional espeak-ng-data_1.49.0+dfsg-3_amd64.deb 85654aee51ced2919c690bc09047fafe 385416 debug extra espeak-ng-dbgsym_1.49.0+dfsg-3_amd64.deb cf27a4447ce1c93ee893fa1931a949cb 9364 sound optional espeak-ng-espeak_1.49.0+dfsg-3_amd64.deb bce1652fd0d155027eeefc39b32b4c59 9091 sound optional espeak-ng_1.49.0+dfsg-3_amd64.buildinfo 1b93306d1622f47877b676eddc9294e8 242826 sound optional espeak-ng_1.49.0+dfsg-3_amd64.deb a731f50814308a1b0b8404714d77a933 199060 libdevel optional libespeak-ng-dev_1.49.0+dfsg-3_amd64.deb fb39c3aad7be36dcce16ccd01075e781 16266 libdevel optional libespeak-ng-libespeak-dev_1.49.0+dfsg-3_amd64.deb a9ac985eaea7f46bd2f9bc5d3fc10046 9346 libs optional libespeak-ng-libespeak1_1.49.0+dfsg-3_amd64.deb 60212be3ca9a71e67341d4785c59df61 362870 debug extra libespeak-ng1-dbgsym_1.49.0+dfsg-3_amd64.deb b0a89bd3efbe2401cb713b498e453a6b 166222 libs optional libespeak-ng1_1.49.0+dfsg-3_amd64.deb -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEE9jJ0zcYwCHPLPSnZ4+Uc6PtrLx0FAlhhM+sACgkQ4+Uc6Ptr Lx1Hgg//dIcnl60LzDl8KPIO1t1+L2i+nFNCeqxVhmPmnH91tNVIW3MhcjyoWwod MZrhAb4tn0wcxT6rCc5dbrcBywfnXqq5C30hmRhS+WO1D71TxiJ+aYxSXuvs8zuP 77ssx3x9upHvxA/S1kibiaoPvSzlPXyAP6dKiJ8+iL84Dn4oE/zFPB+eH9GqyJwN 0JhL0ZRG1c0uK9bvNHRax4cZ578Laz3vb94INmhq35DPynT/kNXY+b5tx1J5B64x JRH6mIV0BipnwMtXfU0wA6QSa23Q35i9mPLXxW/9RLDfvSbfZIiApKazVRoc9xoj 1He/Y/Jx9R7yvom29b+PNA7IlWcPOoqrUBOU9B09ECP++ttAW9LBrBK07atSUT1Q QNTD9SIRE6QLEkixgnXfVzTlTLAp3IAd9GR3c+XsVYlmj40C44OvBMfh/+1RbCYq oHeYegjlkXX+WRxBjywiTDwyP1nZGIHzPSqeNBerxcLukAmXn5pHuX1aXBGzWmNe g4tTXJtCZVCDsMHre7il1jPb398Rf/LMqTQQ91z+pp0Ja8iTL720VRAm7e8wVgoc 109R85ieKB8v1i2OSjhi+zzzjTOolGwCoAENt+4qTZ7R+N6YEZw1mQg8xXPnhyF9 rEHX6hIjl4VGbjNroEYR+4Qm8dn5s9iB/j4FKdZtcOT9HJq/r/A= =67m5 -----END PGP SIGNATURE-----
--- End Message ---
