Hello, Sebastian Humenda, le jeu. 21 avril 2022 07:03:38 +0000, a ecrit: > Samuel Thibault schrieb am 18.04.2022, 19:06 +0200: > >Sebastian Humenda, le lun. 18 avril 2022 18:46:24 +0200, a ecrit: > >> Samuel Thibault schrieb am 18.04.2022, 18:18 +0200: > >> >> >Uh, perhaps there is a low-level communication problem, was that > >> >> >through > >> >> >USB or Ethernet? > >> >> > >> >> It is connected via USB. > >> > > >> >I had had issues with USB connectivity on the Everest V3/V4 of our > >> >university, we even had to replace the communication card. I'd recommend > >> >trying with ethernet. > >> > >> Are you saying it is a hardware issue or are you hinting at a software > >> issue on > >> GNU/Linux? > > > >I'm not sure, I hadn't investigated. But at the very least it seemed > >there were problems at the USB protocol itself, possibly Linux-specific > >just unseen on Windows. > > Ok, I see. For the sake of completeness, I have upgraded liblouis and am now > seeing the same behaviour as with graphics embossing. The last page is > half-emitted, stuck in the middle and the embosser stops responding. > For the sake of completeness, I have attached an excerpt of the error log > below.
The attachment was missing? Samuel
