Ventoy is unsurpassed at ease of making bootable disks, just copy the iso to the partition that is for the iso files, it's empty at the start. Reboot and you will see a screen to pick which iso you want to boot with. I don't know if this is accessible or not.
dd under Linux is always the way to go to make USB sticks from iso files: dd if=~/Downloads/myiso.iso of=/dev/sdb bs=4M status=progress Works every time. Just change the if - input file location and the of - output device to make it work. bs - block size and status=progress are optional, but very helpful. Best to all, DR On Sun, May 28, 2023 at 12:53 AM K0LNY <[email protected]> wrote: > I fixed the problem, I could have done this with the earlier ISO, that was > CD ROM size. > But I used Rufus to write it, and it asks if I want ISO mode so I can > access the files later, or DD mode. > Previously I selected ISO mode, but I wondered if that is why the > installer could not access the installation media. > So I rewrote it with DD mode, and plugged the USB drive back in, and it > read it. > I didn't have to abort the place in the installation, just redoing the > media and plugging it in worked. > Just thought others can benefit from this. > Glenn > > > > ----- Original Message ----- > *From:* K0LNY <[email protected]> > *To:* [email protected] > *Sent:* Saturday, May 27, 2023 11:33 PM > *Subject:* trouble mounting installation media error > > Hello, > I've tried it with the net install CD size image, and now I've tried it > with the DVD size version of 11.7. > Both times, I get past the third step, the keyboard selection, and it says > couldn't mount installation media > I've tried unplugging my USB drive and plugging it in again, but it still > cannot mount it. > It is a 4 GB USB flash cartridge. > I tried plugging the install cartridge into another USB port, but it > didn't make a difference. > About a year or so back, I used the same card for the Bullseye I installed > on the same i386 computer and it read from the cartridge fine. > Maybe an earlier Bullseye image will work. > Any ideas? > Thanks > > Glenn > >
