On Thu, Oct 19, 2000 at 01:24:50AM -0700, Jakob 'sparky' Kaivo wrote: > > I seem to be having the exact opposite problem. I have a PC-164 with a > SCSI disk (Seagate Barracuda) and Tekram controller (DC-390F), but > while installation goes fine, SRM is *not* happy. When I run "show > config", the controller is shown, but "show device" shows only the > floppy drive (DVA0). Does anyone have any experience with SRM not > liking Tekram controllers?
SRM is not guaranteed to like *any* card that it wasn't tested/sold with. That's not to say it won't work with an arbitrary card, but that card best "look like" (PCI vendor/device IDs) one that it was tested against. If you don't have the latest SRM console version, try updating to it and then try again. If it still fails, I guess you're out of luck... Good luck. --Jay++ ----------------------------------------------------------------------------- Jay A Estabrook Alpha Engineering - LINUX Project Compaq Computer Corp. - MRO1-2/K20 (508) 467-2080 200 Forest Street, Marlboro MA 01752 [EMAIL PROTECTED] -----------------------------------------------------------------------------
