On Wed, Dec 20, 2000 at 08:34:32AM -0500, Rich Payne wrote: > It will take up to 256MB DIMMS. The SX maxes at 1Gig of memory, which is > 256x4. I'm currently running with 2 256 DIMMs so I know this will > work. One small note is that the SX does not require ECC memory like the > other (PC164, LX etc...) thought it will work fine with it.
OK thanks for that. Two people say 256 MB so that must be right :) So the HCL is right and the front main screen is wrong. > Well, for what purpose? The list of cards that SRM will work with is > pretty small...DE500 (Tulip) and some clones, and if you get a recent SRM, > Intel EEpro100 cards (WARNING: update the linux kernel driver for this as > the current driver has many issues!). If you don't care about SRM being > able to use the card, then the choice is much greater. I can say that the > 3Com series (3C905-B,C-TX etc...) do work fairly well. SRM? (checks website), oh like the (ahem) "go prompt" or forth monitor elsewhere. I assume the significance of this is for network booting only? If SRM doesn't know about a, say, 3C905-B, then it cannot network boot but when Linux starts up all is well? BTW, I was going to look at the ALO database but there is something *VERY* unhappy on your webserver. I can connect to port 80 but I get no reply from a HTTP request. This is talisman of course. - Craig -- Craig Small VK2XLZ GnuPG:1C1B D893 1418 2AF4 45EE 95CB C76C E5AC 12CA DFA5 Eye-Net Consulting http://www.eye-net.com.au/ <[EMAIL PROTECTED]> MIEEE <[EMAIL PROTECTED]> Debian developer <[EMAIL PROTECTED]>
