On Fri, 19 Jan 2001, Anish Patel wrote: > Booting from a SRM console, could it be because the drive is over 20 gigs?
wouldn't think so...is this a fairly recent SRM? > yes the settings are correct for slave and master and they are on the first > IDE channel OK, which kernel are you booting? It almost sounds like the kernel you're using doesn't have SRM support in there. --rdp > > -----Original Message----- > From: Rich Payne [mailto:[EMAIL PROTECTED] > Sent: Friday, January 19, 2001 9:01 AM > To: Anish Patel > Cc: [email protected] > Subject: Re: Alpha and Debian > > > > Are you booting from SRM or AlphaBIOS? and make sure all the device > master/slave selections are setup properly. > > --rdp > > On Fri, 19 Jan 2001, Anish Patel wrote: > > > I have an Alpha 164SX, every time I try to install ANY Linux I get the > error > > hda2:<> lost interrupt or something similar, I know it has the lost > > interrupt part > > I want to know if this is something wrong with the new kernel because I > have > > installed BSD with out any trouble. > > > > I have attempted to install Mandrake 7.0, the latest Debain and Turbo > > I installed Redhat 5.2 on this machine about 3 years ago but I was put > away > > in storage. the hd had be removed by me earlier > > > > SYSTEM CONFIG: > > Alpha 533 21164 (on board IDE) > > 128 Megs PC 100 mem > > 20G drive (IDE) > > 48X cd rom (IDE) > > Matrox Mystique 4Meg > > apparently USB is on the board, just headers are not provided. > > > > > > > > > > -- > Rich Payne > [EMAIL PROTECTED] www.alphalinux.org > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > > -- Rich Payne [EMAIL PROTECTED] www.alphalinux.org
