Le mar 19/08/2003 � 14:31, Bourdin Pierre a �crit :
> Le dim 17/08/2003 � 21:04, George France a �crit :
> > Please use the wrapper CD, as per the message that was posted to the 
> > [EMAIL PROTECTED], that I have include below.
> > 
> > 
> > --George
> > 
> 
> 
> But any of the kernel I used (2.4.18 & 2.4.21 + RedHat 7.2 or wrapper
> CD) gives me the same error:
> <<
>       DAC960 RAID Drivers Version 2.4.11 of 11 October 2001
> ...
> DAC960#0 Unable to map Controller Register Window for Controller at
> DAC960#0 PCI Bus 0 device 6 Function 0 I/O Adress Qx9480 PCI Address 0x0
> >>
> 
> The card is identified as a Mylex D040340-4-DEC wchich should be a
> DAC960PD-3 according to the Cross-Refernce List.
> It is although seen as "PCI Symbios Logic C810 Mylex DAC960 / Digital
> Controler SWXCR-Ex Raid" 
> The firmware is 2.73.
> 
> Do you have any idea why I have such error ?  
> 
> Is there raid config that are more suitable than others ? Raid 0 ? raid
> 1 ? Raid 0+1 ?
> With a better support ?
> 
> I don't know what to do ??
> Rebuild the raid config ? forget about this card ?
> 
> If you have a last idea before I resigned and break the raid config...
> 
> Thanks, Pierre.

I have also a D040349...
I've seen that ?

On Wednesday 26 February 2003 11:52 am, Jay Estabrook wrote:
>
> The following DAC960 models have been successfully used with the
> modified Linux driver and the updated custom firmware version 2.70:
>
>       Part No         MYLEX name      DEC name
>       -------         ----------      --------
>
>       D040347         DAC960PD-1      KZPSC 1 channel
>       D040348         DAC960PD-2      KZPSC 2 channels
>       D040349         DAC960PD-3      KZPSC 3 channels
>
>       D040395         DAC960PU-1      KZPAC 1 channel
>       D040396         DAC960PU-2      KZPAC 2 channels
>       D040397         DAC960PU-3      KZPAC 3 channels
>
> Note that KZPSC is Fast/Wide, while KZPAC will run Ultra/Wide, IIRC.
>
> Good luck, and please let me know of any problems.
>
>  --Jay++

I've not tried but I believe it is only upgradable to firmware 2.70 ?
Is it better to use the D040340 or D040349 ? Both are referenced as
DAC960PD-3...

Pierre.
-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
Pierre BOURDIN 
I.M.E.R.I.R. 
Av. Pascot BP 2013 
66011 PERPIGNAN 
t�l: 04 68 56 80 18 
fax: 04 68 55 03 86 
email: [EMAIL PROTECTED] 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~


Reply via email to