On Tue, Mar 23, 2004 at 09:04:37PM +0100, Hartwig Atrops wrote: > > I bought a DEC 500au with the above graphics board some weeks ago. > > Woody works on it, but only in text mode. Searching XFree86 as well > as Google results in "not supported" messages. > > Kernel documentation (tgafb.txt) coming with 2.4.20 tells the same - dated > april 2000. > > The latest related thread on this list I have in my mail archive is one year > old. > > Any news? What about framebuffer support in kernel 2.6?
PowerStorm Actual Model Hardware ---------- -------- 3D10 S3 Trio64 (NT only) 3D30 TGA2 8-plane 4D10T ELSA Gloria Synergy 8 4D20 TGA2 24-plane 4D40T Intergraph Cateye 4D50T Intergraph Cateye 4D51T Intergraph Cateye 4D60T Intergraph Cateye 300 Evans and Sutherland REALimage 350 Evans and Sutherland REALimage Only 3D10, 3D30, 4D10T and 4D20 have XFree86 support. If you really DO have a 4D20, it is fully supported, regardless of what the docs (kernel or xfree86) have to say. Kernels 2.4.x have always had support for it in text mode, as it looks and behaves just like a VGA, which the frontend Cirrus chipset is. XFree86 from 4.1.0 on also supports it. You DO (often) have to put in an appropriate "BusID" option in the "Device" Section of the XF86Config file, but beyond that, it should work fine, albeit a bit slow when compared to more modern (and more fully accelerated) cards. 3D30 will ONLY work in 8-bit mode, and 4D20 ONLY in 24-bit mode. Kernels 2.6.x should also support either TGA2 fully in text mode (though the older original TGA is currently problematic, IIRC). Good luck. --Jay++ --------------------------------------------------------------- Jay A Estabrook HPTC - LINUX support Hewlett-Packard Company - ZKO2-3/N30 (603) 884-0301 110 Spit Brook Road, Nashua NH 03062 [EMAIL PROTECTED] ---------------------------------------------------------------
