Hello, When I boot my DEC 3000 it gives me the error code message in the subject.
What is the meaning of the boot error code? The rest of the message is the install report. Thanks. Anibal Monsalve Salazar -- .''`. Debian GNU/Linux | Building 28C : :' : Free Operating System | Monash University VIC 3800 Australia `. `' http://debian.org/ | http://www-personal.monash.edu/~anibal `- On Tue, Sep 07, 2004 at 02:55:27PM +1000, Anibal Monsalve Salazar wrote: >Package: installation-reports > >INSTALL REPORT > >Debian-installer-version: sarge-alpha-netinst.iso 20040902 >Date: Tue, 07 Sep 2004 14:39:17 +1000 >Method: cdrom > >Machine: digital DEC 3000 - M300LX >Processor: KN16-DA -V6.9-S87E-I21A-sV2.1L-DECchip 21064 P3.0 >Memory: 64 Mbytes >Root Device: DKA300 > >Base System Installation Checklist: >[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it > >Initial boot worked: [E] >Configure network HW: [ ] >Config network: [ ] >Detect CD: [ ] >Load installer modules: [ ] >Detect hard drives: [ ] >Partition hard drives: [ ] >Create file systems: [ ] >Mount partitions: [ ] >Install base system: [ ] >Install boot loader: [ ] >Reboot: [ ] > >Comments/Problems: > > DEC 3000 - M300LX >Digital Equipment Corporation > VPP PAL V5.56-80800101/OSF PAL V1.45-80800201 - Built on 30-SEP-1996 > 09:18:31.84 > >TCINFO DEVNAM DEVSTAT >------ -------- -------- > CPU OK KN16-DA -V6.9-S87E-I21A-sV2.1L-DECchip 21064 P3.0 > OSC 125 MHz > ASIC OK > MEM OK > FEROM OK >6 > CXT OK >5 > NVR OK > SCC ? 60 > NI OK > ISDN OK >4 > SCSI OK > >>>> show memory > >DEC 3000 - M300LX Memory: 64 Mbytes >------------------------------------------ >BANK # MEMORY_SIZE START_ADDRESS >------ ----------- ------------- >0 008 Mbytes 0x00000000 >1 008 Mbytes 0x00800000 >2 008 Mbytes 0x01000000 >3 008 Mbytes 0x01800000 >4 008 Mbytes 0x02000000 >5 008 Mbytes 0x02800000 >6 008 Mbytes 0x03000000 >7 008 Mbytes 0x03800000 > >>>> sh dev > > BOOTDEV ADDR DEVTYPE NUMBYTES RM/FX WP DEVNAM REV > ------- ---- ------- -------- ----- -- ------ --- > ESA0 08-00-2B-BD-78-D1 , TENBT > DKA0 A/0/0 RODISK 263.12MB RM WP CD-ROM > XS03 > DKA300 A/3/0 DISK 535.65MB FX RZ25L > 0007 > ..HostID.. A/7 INITR > >>>> boot dka0 -flags 0 >INIT-S-CPU... >INIT-S-ASIC... >INIT-S-MEM... >INIT-S-NVR... >INIT-S-CXT... >INIT-S-SCC... >INIT-S-NI... >INIT-S-SCSI... >INIT-S-ISDN... >AUDIT_BOOT_STARTS ... >AUDIT_CHECKSUM_GOOD >AUDIT_LOAD_BEGINS >AUDIT_LOAD_DONE >aboot: Linux/Alpha SRM bootloader version 0.9b >aboot: switching to OSF/1 PALcode version 1.45 >aboot: booting from device 'SCSI 0 4 0 0 0 0 FLAMG-IO' >aboot: no disklabel found. >iso: Max size:128479 Log zone size:2048 >iso: First datazone:36 Root inode number 73728 >aboot: loading uncompressed boot/vmlinuz... >aboot: loading compressed boot/vmlinuz... >aboot: zero-filling 407496 bytes at 0xfffffc000056bf48 >aboot: loading initrd (3006092 bytes/2935 blocks) at 0xfffffc0003c10000 >aboot: starting kernel boot/vmlinuz with arguments ramdisk_size=16384 >root=/dev/ram devfs=mount,dall > >?06 DBL MCHK > PC= 00000000.00060401 PSL= 00000000.00000007 > >
signature.asc
Description: Digital signature
