Hello JiÅÃJÃnskÃ
Just remove the Mylex DAC960 controller and it will boot. There is an issue with the dec oem firmware on that controller.
Regards, Adrian.
JiÅÃJÃnskà wrote:
(bf24 is not kernel parametr, but kernel version. This version was usedin debian woody for i386.)
Some next information:
I used for booting this command: boot dka500 - (and chosed 0 for first predefinet option - standart kenel and console on VGA inside computer) and boot dka500 -file boot/linux -flags "initrd=boot/root.bin nosmp" with same result (descripted in first mail)
devices: (I rewrited it usin pen and paper, there can by mistakes)
P00>>> show dev polling ncr0(NCR53c810) slot1, bus 0 PCI, hose2 SCSI Bus ID 7 dka 500.5.0.1.1 KDa500 RRD46 0557 mka600.6.0.1.1. MKa600 TL709 0173 polling isp(ISP1020) slot 0, bus 2 PCI, hose 1 SCSI, Bus ID 7 polling floppy0(FLOPPY) PCEB-XBUS hose0 dva0.0.0.1000.0 DVA0 RX23 polling dac0 (Mylex DAC960) slot 5, bus 0 PCI, hose0 dra0.0.0.5.0 DRA0 3 Member RAID 5 polling tulip0, DECchip (21140-AA) slot 3, bus 0 PCI, hose0 ewa0.0.0.3.0 00-00-F8-05-1F-3F Twidted-Pair
Thanks you for your suggests.
Jiri Jansky
