Hi,
I've just acquired a DS20 with 2 cpus and a couple of dac960 controllers. Done a debian base install from the latest netinst release candidate, all worked fine (except it didn't find the cd drive on the sym53c8xx controller until I loaded the module manually). Then I installed the 2.6.8 smp kernel kernel (2.6.8-1-smp off the cd, but also see exactly the same problem with the latetest 2.6.8-2-smp package, 2.6.8-7). It hangs striaght after printing the banner:
DAC960: ***** DAC960 RAID Driver Version 2.5.47 of 14 November 2002 ***** DAC960: Copyright 1998-2001 by Leonard N. Zubkoff <[EMAIL PROTECTED]>
The 2.6.9-2-generic (uniprocessor) works fine:
DAC960: ***** DAC960 RAID Driver Version 2.5.47 of 14 November 2002 *****
DAC960: Copyright 1998-2001 by Leonard N. Zubkoff <[EMAIL PROTECTED]>
DAC960#0: Configuring Mylex DAC960PU PCI RAID Controller
DAC960#0: Firmware Version: 2.70-0-03, Channels: 3, Memory Size: 8MB
DAC960#0: PCI Bus: 0, Device: 9, Function: 0, I/O Address: 0x8080
DAC960#0: PCI Address: 0xA08A000 mapped at 0xFFFFFD000A08A000, IRQ Channel: 23
DAC960#0: Controller Queue Depth: 64, Maximum Blocks per Command: 1024
DAC960#0: Driver Queue Depth: 63, Scatter/Gather Limit: 17 of 17 Segments
DAC960#0: Stripe Size: 64KB, Segment Size: 64KB, BIOS Geometry: 128/32
DAC960#0: Physical Devices:
DAC960#0: 0:0 Vendor: DEC Model: RZ1DF-CB (C) DEC Revision: 0372
[....]
and the machine comes up fine.
Anyone seen this before? Anyone have an SMP box with a dac960 working with the
latest kernels?
Cheers,
David
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
