I found a bug report about this in the bts. I will forward. > -----Original Message----- > From: Uwe Schindler [mailto:[email protected]] > Sent: Saturday, August 22, 2009 7:06 PM > To: [email protected] > Subject: Strange QLA1040 firmaware load error with 2.6.30 from testing > > After upgrading to linux-image-2.6.30-alpha-generic I get the following > trace in the kernel log. The qlogic firmware package is installed, as > initramfs complained about missing bin files. > > The driver loads and the system works as expected, all disks are reported: > > [ 4.416013] qla1280 0000:00:09.0: firmware: requesting qlogic/1040.bin > [ 4.416013] ------------[ cut here ]------------ > [ 4.416013] WARNING: at > /build/buildd-linux-2.6_2.6.30-5-alpha-u828kA/linux-2 > .6-2.6.30/debian/build/source_alpha_none/kernel/softirq.c:141 > _local_bh_enable_i > p+0x4c/0xa4() > [ 4.416013] Modules linked in: tulip(+) bitrev qla1280(+) scsi_mod > usbcore(+) > de2104x crc32 > [ 4.416013] fffffc000f0479f8 0000000000000005 fffffc000103bef0 > fffffc000e86d7 > c0 > [ 4.416013] 0000000000000000 fffffc000c652c00 fffffc000e86d7c0 > fffffff > f00000010 > [ 4.416013] fffffc00011eb2d4 0000000000000001 fffffc00011ff958 > fffffc0 > 00c652c00 > [ 4.416013] fffffc000c652c18 fffffc000e86d7c0 fffffc000114baec > fffffc0 > 00c76e030 > [ 4.416013] 0000000000000007 fffffc000e86d7c0 fffffc000c76e000 > fffffc0 > 00e8113c0 > [ 4.416013] fffffc00013c66e8 fffffc00012bfdab 0000000000000001 > 0000000 > 000000000 > [ 4.416013] Trace: > [ 4.416013] [<fffffc000103bef0>] _local_bh_enable_ip+0x4c/0xa4 > [ 4.416013] [<fffffc00011eb2d4>] sk_filter+0xcc/0x104 > [ 4.416013] [<fffffc00011ff958>] netlink_broadcast+0x1e0/0x3bc > [ 4.416013] [<fffffc000114baec>] kobject_uevent_env+0x384/0x4a0 > [ 4.416013] [<fffffc00011b4ad0>] _request_firmware+0x468/0x57c > [ 4.416013] [<fffffc000116485c>] local_pci_probe+0x24/0x38 > [ 4.416013] [<fffffc0001164b4c>] pci_device_probe+0x64/0xa0 > [ 4.416013] [<fffffc00011af048>] driver_probe_device+0xcc/0x1e0 > [ 4.416013] [<fffffc00011af1e4>] __driver_attach+0x88/0xd4 > [ 4.416013] [<fffffc00011ae5dc>] bus_for_each_dev+0x68/0xd0 > [ 4.416013] [<fffffc00011af15c>] __driver_attach+0x0/0xd4 > [ 4.416013] [<fffffc00011aee00>] driver_attach+0x2c/0x40 > [ 4.416013] [<fffffc00011adb28>] bus_add_driver+0xd8/0x304 > [ 4.416013] [<fffffc00011af69c>] driver_register+0x108/0x1d4 > [ 4.416013] [<fffffc000116501c>] __pci_register_driver+0x5c/0x120 > [ 4.416013] [<fffffc00010100bc>] do_one_initcall+0x74/0x1cc > [ 4.416013] [<fffffc000105fb68>] SyS_init_module+0xf0/0x2c0 > [ 4.416013] [<fffffc000105fb50>] SyS_init_module+0xd8/0x2c0 > [ 4.416013] [<fffffc0001010de4>] entSys+0xa4/0xc0 > [ 4.416013] > [ 4.416013] ---[ end trace b7134e8cc61d5fa9 ]--- > > Anybody has seen this, too? > > Just one question: Is the firmware always needed or can I uninstall the > qlogic-firmware package again? Does the controller has an eprom or does it > only works with driver-provided firmware? As the firmware does not seem to > be loaded correctly, is it really needed? > > I do not want to try this out, as I have no physical access to the machine > currently. > > Uwe > > ----- > Uwe Schindler > H.-H.-Meier-Allee 63, D-28213 Bremen > http://www.thetaphi.de > eMail: [email protected] > > > > -- > To UNSUBSCRIBE, email to [email protected] > with a subject of "unsubscribe". Trouble? Contact > [email protected]
-- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
