Completed initial tests. Last working kernel for 164Ux is 2.6.22.19First broken kernel is 2.6.23Installed Git package.Need some help how to continue:As linux-2.6.23 is older than 2.6.22.19 would it be possible to specify 2.6.22.19 as good and 2.6.23 as bad ?It has a higher revision number but is actually older !Or is it necessary to start with a good older revision which would be 2.6.22.9 ?Do I need the git repository from " git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git " ?What would be the best starting point ?Ian
Von: Ian Las <[email protected]> Betreff: Re: Upgrading Sarge to Etch - failing to boot new kernel An: [email protected] CC: "Matt Turner" <[email protected]> Datum: Sonntag, 1. August, 2010 15:22 Uhr >> All my trials ended with kernel panic. >> >> Below the end of the message log: >> >> Major devices are: ramdisk (0001) fd (0002) ide0 (0003) sd (0008) sd (0041) >> sd ( >> 0042) sd (0043) sd (0044) >> [MS-DOS FS Rel. 12,FAT] >> ...Image loaded into memory, entry @ 0xfffffc0000310000 >> Setting up Milo reboot parameter block at 0xfffffc0000000140 >> Boot line is bootdevice=sdb2 bootfile=vmlinux.gz root=/dev/sdb6 >> Bootstrap complete, kernel @ 0xfffffc0000310000, sp @ 0xfffffc0000304000 >> ...turning on virtual addressing and jumping to the Linux Kernel >> -------------------------------------------------------------------------------- >> Kernel panic - not syncing: Attempted to kill init! >> >>Thanks,ian >> > > >If you could git-bisect this, it would go a long way toward getting it fixed. > >I've got a 164UX, but it doesn't have Linux installed, nor am I going>to have >any time to tinker with it for a while. > >Matt >
