Thank-you so much, I got it working now! I would have never figured this out myself.
On Tue, 09 Nov 2004 07:03:06 +0100, Harald Dunkel <[EMAIL PROTECTED]> wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Count L�szl� de Alm�sy wrote: > | "Harald Dunkel" <[EMAIL PROTECTED]> writes: > | > |>Workaround is to add your sata driver to /etc/mkinitrd/modules > |>and rebuild the initrd. > | > | > | I've now run into this problem when I tried to build by own 2.6.9 > | kernel via kernel-package. > | > | How can I figure out which sata drivers I need to add to > /etc/mkinitrd/modules? > | > > You should check the output of lspci and lspci -n for > your sata controller. lspci | grep -i sata returns for > my PC: > > 0000:01:07.0 RAID bus controller: Silicon Image, Inc. (formerly CMD > Technology Inc) SiI 3512 [SATALink/SATARaid] Serial ATA Controller (rev 01) > ^^^^^^^^^^^^ > lspci -n | grep 0000:01:07.0 says > > 0000:01:07.0 0104: 1095:3512 (rev 01) > ~ ^^^^ ^^^^ > Next step is to search for 1095 and 3512 in > /lib/modules/2.6.9/modules.pcimap: > > % grep 1095 /lib/modules/2.6.9/modules.pcimap | grep 3512 > sata_sil 0x00001095 0x00003512 0xffffffff 0xffffffff 0x00000000 > 0x00000000 0x0 > ^^^^^^^^ ^^^^ ^^^^ > In this example "sata_sil" is the module name to add > to /etc/mkinitrd/modules. Since modules.pcimap is > generated using information compiled into the kernel > modules, only the modules you have built are listed. > > Regards > > Harri > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.2.5 (GNU/Linux) > Comment: Using GnuPG with Debian - http://enigmail.mozdev.org > > iD8DBQFBkF2ZUTlbRTxpHjcRAiGVAJ9lvcmbuasMuTtCJJ3KT12rBrsN/gCfVFKK > WKsRFiO5BaM4oKVgBYS3CwI= > =q4oN > -----END PGP SIGNATURE----- >
