Thank�s, for all, I'll try Xorg
On Tue, 15 Feb 2005 03:03:14 -0700, the owner <[EMAIL PROTECTED]> wrote: > Jaime Ochoa Malag�n wrote: > > > The ati driver say: > > > > (II) Primary Device is: PCI 01:00:0 > > (II) ATI: Candidate "Device" section "Radeon_Analog_Output". > > (WW) ATI: PCI/AGP Mach64 in slot 1:0:0 could not be detected! > > (WW) ATI: PCI/AGP Mach64 in slot 1:0:1 could not be detected! > > Yes. This happened to me also when updating my old XFree86 > just today. That must have changed recently. Sorry. > > > In this moment I succeed to run X with the radeon driver, disabling > > all the Modules and then enabling one by one. > > Many congratulations! > > >> I would like to know how the fglrx does on glxgears. My > >> Xorg is up to 2130 FPS with my Radeon 9250. Try this: > > > > I found it... > > Sorry... > > > > (with vesa ~1600x...) > > 2524 frames in 5.0 seconds = 504.800 FPS > > 2760 frames in 5.0 seconds = 552.000 FPS > > 2640 frames in 5.0 seconds = 528.000 FPS > > This looks fairly normal. The glxinfo should say "direct > rendering: yes". If not then see: > http://lists.debian.org/debian-amd64/2005/02/msg00401.html > > I have been using Xorg Server libraries and modules recently > and have had 2169FPS. I switched back to Xfree today and had > the same speed. Then I remembered the libraries and modules > from Xorg were still in /usr/local. So here are the results > with XFree86 Xserver using Xorg libs and Xorg modules: > > > Script started on Tue 15 Feb 2005 12:05:37 AM MST > > libGL warning: 3D driver claims to not support visual 0x23 > > libGL warning: 3D driver claims to not support visual 0x24 > > libGL warning: 3D driver claims to not support visual 0x25 > > libGL warning: 3D driver claims to not support visual 0x26 > > libGL warning: 3D driver claims to not support visual 0x27 > > libGL warning: 3D driver claims to not support visual 0x28 > > libGL warning: 3D driver claims to not support visual 0x29 > > libGL warning: 3D driver claims to not support visual 0x2a > > libGL warning: 3D driver claims to not support visual 0x2b > > libGL warning: 3D driver claims to not support visual 0x2c > > libGL warning: 3D driver claims to not support visual 0x2d > > libGL warning: 3D driver claims to not support visual 0x2e > > libGL warning: 3D driver claims to not support visual 0x2f > > libGL warning: 3D driver claims to not support visual 0x30 > > libGL warning: 3D driver claims to not support visual 0x31 > > libGL warning: 3D driver claims to not support visual 0x32 > > 8644 frames in 5.0 seconds = 1728.800 FPS > > 10842 frames in 5.0 seconds = 2168.400 FPS > > 10842 frames in 5.0 seconds = 2168.400 FPS > > 10843 frames in 5.0 seconds = 2168.600 FPS > > 10842 frames in 5.0 seconds = 2168.400 FPS > > 10842 frames in 5.0 seconds = 2168.400 FPS > > 10843 frames in 5.0 seconds = 2168.600 FPS > > 10842 frames in 5.0 seconds = 2168.400 FPS > > 10842 frames in 5.0 seconds = 2168.400 FPS > > 10843 frames in 5.0 seconds = 2168.600 FPS > > 10842 frames in 5.0 seconds = 2168.400 FPS > > > > Script done on Tue 15 Feb 2005 12:06:36 AM MST > > That was the same as before! Then I took out the modules and > had about 900FPS until I took out the Xorg libraries left in > /usr/local. I took out the /usr/local and then I got the > same 550FPS with plain Xfree all with glxinfo 'yes'. I hope > they update the DRI inside Xfree soon because that works > too! Anyway, I went back to Xorg X11R6.8.2 again. > > I built my own Xorg or there is a version at ubuntu that is > supposed to work easily with Debian. If you want even faster > GLX then the Xorg is much faster than the fglrx. > > Congratulations again. > > [EMAIL PROTECTED] > --------------------------------- > AMD Athlon64 @2.4Ghz Corsair TwinX1024-3200XL @480Mhz DDR > ASUS A8V Deluxe Pro ASUS Radeon A9250Ge/Td/256 > Creative SB Live WD Raptor SATA Maxtor PATA IBM/Okidata > Color PostScript3 Lexmark Mono PostScript2 > Debian GNU/Linux debian-amd64/pure64 sid XFree86 4.3.0 > Xorg X11R6.8.2 1.5 Mb DSL > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- Enga�arse por amor es el enga�o m�s terrible; es una p�rdida eterna para la que no hay compensaci�n ni en el tiempo ni en la eternidad. Kierkegaard Jaime Ochoa Malag�n Integrated Technology Tel: (55) 52 54 26 10
