Dale E. Martin <[EMAIL PROTECTED]> wrote: > I installed my SN95G5 with very few problems. (During the CD part of the > install the network card did not work, once I was running from the disk it > was fine.) I'm writing this message on it right now (albeit from the x86 > port - I sometimes run amd64 on it as well.) I had to jump through some > minor hoops to get xfs working, too.
> Look at this message for the version of the installer I used: > http://lists.debian.org/debian-amd64/2005/02/msg00015.html Yes, it was the me you replied to in the thread mentioned above and I did try this image, but same problem: it gets to the point of loading the sata_nv driver and then it stalls for about 30 secs. Continuing with the installation just results in the disk not being detected. I have tried around 20 images over the last month or so and they all have the same problem. Just tried the latest monolithic iso from March 5, same problem. It is a little strange that it works for you and not for me. Maybe the difference lies in the brand of harddisk? I have a Seagate Sata 120 GB sata150 7200.7 Rpm / NCQ disk on the first sata contoller. I tried gentoo and compiled my own kernel. I compiled the sata_nv drier statically into the kernel and then there is no problem. Morten -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
