Hi, another try to get it working... I've tried to use mISDN but get the following message during booting, the driver is unregistred :(
mISDNd: kernel daemon started mISDNd: test event done ISAC module $Revision: 1.16 $ AVM Fritz PCI/PnP driver Rev. 1.29 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 16 (level, low) -> IRQ 177 mISDN_fcpcipnp: found adapter Fritz!Card PCI v2 at 0000:02:08.0 fritz card 000001003d619000 dch 000001003d6190e8 bch1 000001003d619378 bch2 000001003d619618 AVM PCI V2: stat 0x240010e AVM PCI V2: Class E Rev 1 AVM PnP: HDLC version 2 mISDN: AVM Fritz!PCIv2 config irq:177 base:0xA000 spin_lock_adr=000001003d619038 now(ffffffffa001aa80) busy_lock_adr=000001003d619038 now(ffffffffa001aa80) AVM PCI/PnP: reset AVM PCI/PnP: S0/S1 40/2 Fritz1 ISAC STAR 40 Fritz1 ISAC MODE c0 Fritz1 ISAC ADF2 ff Fritz1 ISAC ISTA 0 Fritz1 ISAC CIR0 7 mISDN_isac_init: ISACSX Fritz1 HDLC 1 STA 82000000 Fritz1 HDLC 2 STA 82000000 ISDN L1 driver version 1.11 AVM Fritz!PCI: IRQ 177 count 2 fritz 1 cards installed pnp: the driver 'fcpnp' has been registered ISDN L2 driver version 1.19 mISDN: INTERNAL ERROR in drivers/isdn/hardware/mISDN/stack.c:595 release_l1 id 1 mISDNd: addr(f0000) prim(f1980) failed err(ffffffa4) pnp: the driver 'fcpnp' has been unregistered has anybody an idea?! Thanks, Pavel Am Mittwoch, 16. M�rz 2005 23:22 schrieb [EMAIL PROTECTED]: > "Fritz!Card PCI v2.0" is a passive ISDN controller > http://www.avm.de/en/Produkte/FRITZ/FRITZ_Card_PCI/db_FRITZ_Card.pdf > > "Fritz!DSL" is an ADSL+ ISDN controller > http://www.avm.de/en/Produkte/FRITZCard_DSL/FRITZ_Card_DSL/datasheet_FCardD >SL_engl.pdf > > Am Mittwoch, 16. M�rz 2005 22:24 schrieb Lennart Sorensen: > > On Wed, Mar 16, 2005 at 10:15:14PM +0100, [EMAIL PROTECTED] wrote: > > > since a month I've unsteady searched for solution to get working my AVM > > > cards. has anybody got working one of both cards? > > > > > > For links to information or descriptions thanks in advance > > > > What does those cards do? > > > > If they are PCI ADSL cards, then as far as I know very few have support > > in Linux. > > > > I personally have only used the Sangoma S518 PCI ADSL card and a bunch > > of external ethernet connected ADSL modems. The external just work with > > anything of course. The internal I don't think has amd64 drivers yet > > although the main software developer did tell me he was working on > > porting the drivers to amd64. > > > > Since your card isn't one of those, I have no idea about support, except > > that I have mainly seen that unusualy PCI cards are not supported by > > anything other than the versions of windows they ship with drivers for. > > I often wonder when people get these if they will have support in > > Windows in 5 years. > > > > Len Sorensen
