I am unable to get the built-in 802.11g/b device to work. It is an INPROCOMM IPN2220 wireless chipset, and it is supposed to work with the ndiswrapper program from Source Forge. I have d/l the ndiswrapper source, compiled it with the same gcc as my kernel (3.4) and have obtained the Windows XP drivers and installed them per the instructions. A "ndiswrapper -l" shows the hardware present and the drivers loaded. A "modprobe ndiswrapper" works without complaint, but the "iwconfig" command doesn't show any wlan0 or other devices for wireless! Looking at the logs givess the following 4-line message:
ndiswrapper version 1.1 loaded (preempt=no,smp=no)
ndiswrapper (check_nt_hdr:145): Windows driver is not 64-bit; bad magic: 010B
ndiswrapper (load_sys_files:456): unable to prepare driver 'neti2220'
ndiswrapper (ndiswrapper_load_driver:92): loadndiswrapper failed (65280); checksystem log for messages from 'loadndisdriver'
This was from the syslog entry.
While stumbling around in the dark, I loaded and tried the ia32 libs without luck. I am now completely out of ideas and need some serious help.
Any suggestions??
Thanks in advance.
-Don Spoon-
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
