Hello list, I have GA-K8NS Pro-939 motherboard, rev. 1002 and I am trying to install debian amd64 on it.
The system includes 1 ata cdrom drive and 1 sata hard drive (Seagate Barracuda 7200.7, 120gb, model ST3120827AS, firmware 3.42). Unlike the author of the message http://lists.debian.org/debian-amd64/2004/12/msg00030.html , I only have 2 physical points where to plug sata cable. These are SATA0_SB and SATA1_SB, which is in accordance with the information written in the manual. Unfortunately, the new debian installer does not detect the hard drive. Can anyone give me any advice, how to solve this issue? Kernel version and other info follows: uname gives: 2.6.8-10-amd64-generic #1 Fri Jan 28 04:09:34 CET 2005 x86_64 unknown #lsmod |grep sata sata_nv 9604 0 libata 40072 2 sata_nv # #dmesg |grep ata libata version 1.02 loaded. sata_nv version 0.02 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xDC00 irq 11 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xDC08 irq 11 ata1: no device found (phy stat 00000000) scsi0: sata_nv ata2 is slow to respond, please be patient ata2 failed to respond (30 secs) scsi1: sata_nv # Bios detects my hard drive without any problem. Thank you very much in advance... Best regards Michal -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
