On 6/14/05, John Baab <[EMAIL PROTECTED]> wrote: > > It has loaded the via82cxxx *after* the ide_generic module. Hence the > > ide_generic driver (that doesn't allow DMA to be turned on) is being used. > > > > In /etc/modules put "via82cxxx" above ide_generic (if it appears), and > > reboot. > > If via82cxxx is the right module, DMA should be enabled. > > Worked like a charm, DMA is now turned on and system seems a lot more > stable. My CPU usage still jumps, but there is a clear difference. > > -Thanks for all the help, John > >
I've been having the same problem with the same board but modifying the /etc/modules was one of the first things I tried, and it still refuses to load the modules in the order given. dmesg still shows "Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2" loading immediately after the sata (sata_via), probing all the ide devices, then doing some ACPI stuff before my via82cxxx driver comes along and fails to load because none of the ide devices are still available. The BIOS states both my drives (which would be hda and hdc) are capable of udma mode 5 and udma mode 2, respectively, and /proc/ide/via reflects that data as well. The only theory I've been able to develop for the modules loading out of order was having modutils installed, but a remove and dpkg --purge more than satisfies me that that was not the culprit. I'm running out of ideas and any suggestions would be appreciated. I can provide any confs or dmesg output given a theory but there's too much that's possibly relevant to just start pasting randomly.
