Am Freitag 08 Juli 2005 16:34 schrieb Lennart Sorensen: > On Fri, Jul 08, 2005 at 04:10:57PM +0200, Eduardo wrote: > > adaptec 2010S raid card > > RAID SCSI cards from Adaptec use this driver. > > Well if the drivers are the ones in drivers/message/i2o/ then yes the > installer does in fact leave all of them out. > > I recently built a netinst for sarge amd64 that uses 2.6.11-9-amd64 > instead of the 2.6.8-11 used currently on the "official" cd, which a few > people have used successfully to install on machines that didn't work > with 2.6.8. I could try and add the i2o drivers to it as well and > rebuild it with that setup if you would like to try that. As long as > the i2o uses the standard /dev/sd* scsi driver devices, I imagine it > would actually work. Of course I have no hardware to test that on, but > I am willing to spend an hour or so updating my netinst image. > > The other option is to use another drive/controller while installing, > then use the i2o in the full kernel installed to transfer to i2o and > switch to booting from that. > > Len Sorensen
Nice stuff. On my mashine the hd's are with i2o on /dev/i2o/hda and so on. By the way, they are scsi-disc. :-) Ryven -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
