I got mplayer from deb http://spello.sscnet.ucla.edu/marillat/ sid main Clyde On Mon, Oct 03, 2005 at 10:09:43PM +1000, Dean Hamstead wrote: > try a different file type i guess > ive played everything fine on fbdev (divx etc) > > x11 is when x (your cpu) does all the work > xv passes a lot of it to the graphics card > > scaling in x11 will murder performance > scaling in xv will have no effect on performance as according to my > understanding, the video card does that. > > did you compile mplayer or get debs? > > Dean > > hjalmar wrote: > >No I am not running X as root. I can not get mplayer to work as a normal > >user but I have no problems with it when run as root. > >However when I run mplayer as root mplayer -vo fbdev I get the following > >MPlayer dev-CVS--4.0.2 (C) 2000-2005 MPlayer Team > >CPU: Advanced Micro Devices (Family: 8, Stepping: 0) > >Detected cache-line size is 64 bytes > >CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1 > >Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2 > > > > > > > >Failed to open /dev/rtc: Device or resource busy (it should be readable by > >the user.) > >Opening joystick device /dev/input/js0 > >Can't open joystick device /dev/input/js0 : No such device > >Can't init input joystick > >Setting up LIRC support... > >mplayer: could not connect to socket > >mplayer: No such file or directory > >Failed to open LIRC support. > >You will not be able to use your remote control. > >Playing > >E=mc2-Einstein_and_the_Worlds_Most_Famous_Equation-digitaldistractions.avi. > >AVI file format detected. > >VIDEO: [XVID] 480x272 12bpp 25.000 fps 805.4 kbps (98.3 kbyte/s) > >Clip info: > > Software: VirtualDubMod 1.5.10.1 (build 2439/release) > > ========================================================================== > > Trying to force audio codec driver family libmad... > > Opening audio decoder: [libmad] libmad mpeg audio decoder > > AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000) > > Selected audio codec: [mad] afm:libmad (libMAD MPEG layer 1-2-3) > > ========================================================================== > > ========================================================================== > > Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family > > Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4) > > ========================================================================== > > Building audio filter chain for 48000Hz/2ch/s16le -> 0Hz/0ch/??... > > alsa-init: 1 soundcard found, using: default > > alsa: 48000 Hz/2 channels/4 bpf/65536 bytes buffer/Signed 16 bit Little > >Endian > >AO: [alsa] 48000Hz 2ch s16le (2 bps) > >Building audio filter chain for 48000Hz/2ch/s16le -> 48000Hz/2ch/s16le... > >Starting playback... > >VDec: vo config request - 480 x 272 (preferred csp: Planar YV12) > >Could not find matching colorspace - retrying with -vf scale... > >Opening video filter: [scale] > >The selected video_out device is incompatible with this codec. > > > >FATAL: Could not initialize video filters (-vf) or video output (-vo). > > > >Can't restore text mode: Invalid argument > >alsa-uninit: pcm closed > > > >Exiting... (End of file) > > > >but mplayer -vo xv and mplayer -vo x11 works as root but not as a normal > >user. > >Any ideas? > >Clyde > > > >On Mon, Oct 03, 2005 at 08:01:20PM +1000, Dean Hamstead wrote: > > > >>are you running x as root? > >> > >>do other applications all work? could be some device permissions. > >>does the framebuffer driver work? > >> > >>Dean > >> > >>hjalmar wrote: > >> > >>>I have tried differnet -vo options but get the same result when I run it > >>>as a > >>>normal user. When run as root there is no problem with the -vo option > >>>and the movie starts to play. > >>>When run as a normal user without the -vo option just mplayer "movie > >>>name" > >>>I get the following > >>> > >>>MPlayer 1.0pre7try2-3.4.5 (C) 2000-2005 MPlayer Team > >>>CPU: Advanced Micro Devices (Family: 8, Stepping: 0) > >>>Detected cache-line size is 64 bytes > >>>CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1 > >>>Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2 > >>> > >>> > >>>Failed to open /dev/rtc: Device or resource busy (it should be readable > >>>by > >>>the user.) > >>>Playing Building_the_Great_Pyramid.avi. > >>>AVI file format detected. > >>>VIDEO: [XVID] 320x240 24bpp 29.970 fps 565.2 kbps (69.0 kbyte/s) > >>>========================================================================== > >>>Opening audio decoder: [mp3lib] MPEG layer-2, layer-3 > >>>AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000->176400) > >>>Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3) > >>>========================================================================== > >>>========================================================================== > >>>Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family > >>>Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4) > >>>========================================================================== > >>>Checking audio filter chain for 44100Hz/2ch/s16le -> 44100Hz/2ch/s16le... > >>>AF_pre: 44100Hz/2ch/s16le > >>>AO: [oss] 44100Hz 2ch s16le (2 bps) > >>>Building audio filter chain for 44100Hz/2ch/s16le -> 44100Hz/2ch/s16le... > >>>Starting playback... > >>>[mpeg4 @ 0x9c19f0]looks like this file was encoded with > >>>(divx4/(old)xvid/opendivx) -> forcing low_delay flag > >>>VDec: vo config request - 320 x 240 (preferred csp: Planar YV12) > >>>Could not find matching colorspace - retrying with -vf scale... > >>>Opening video filter: [scale] > >>>The selected video_out device is incompatible with this codec. > >>> > >>>FATAL: Could not initialize video filters (-vf) or video output (-vo). > >>> > >>>Can't restore text mode: Invalid argument > >>> > >>>Exiting... (End of file) > >>> > >>>Why would root not have a problem with the -vo option but a normal user > >>>would? > >>>Clyde > >>> > >>>On Sun, Oct 02, 2005 at 09:49:10PM +1000, Dean Hamstead wrote: > >>> > >>> > >>>>the rtc device wouldnt be the problem, its just the real time clock > >>>>which mplayer can use to make sure the movies are played at the > >>>>correct speed, on my ibook this device doesnt exist and things > >>>>run fine - mplayer uses an internal algorithm instead. > >>>> > >>>>your error output isnt very helpful, try a different '-vo' option > >>>>that seems the be the problem. > >>>> > >>>> > >>>>Dean > >>>> > >>>>hjalmar wrote: > >>>> > >>>> > >>>>>Hello, > >>>>>I am having a little bit of trouble with mplayer and wondering if you > >>>>>guys > >>>>>could give me some help. I apt-get install from > >>>>>deb http://spello.sscnet.ucla.edu/marillat/ sid main > >>>>>Everything went fine but I can only play movies if I am root. Here are > >>>>>the > >>>>>two printouts I get when I start mplayer > >>>>>For root > >>>>>mplayer -vo xv "movie name" > >>>>> > >>>>>MPlayer dev-CVS--4.0.2 (C) 2000-2005 MPlayer Team > >>>>>CPU: Advanced Micro Devices (Family: 8, Stepping: 0) > >>>>>Detected cache-line size is 64 bytes > >>>>>CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1 > >>>>>Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2 > >>>>> > >>>>> > >>>>> > >>>>>Failed to open /dev/rtc: Device or resource busy (it should be > >>>>>readable by > >>>>>the user.) > >>>>>Opening joystick device /dev/input/js0 > >>>>>Can't open joystick device /dev/input/js0 : No such device > >>>>>Can't init input joystick > >>>>>Setting up LIRC support... > >>>>>mplayer: could not connect to socket > >>>>>mplayer: No such file or directory > >>>>>Failed to open LIRC support. > >>>>>You will not be able to use your remote control. > >>>>>Playing Building_the_Great_Pyramid.avi. > >>>>>AVI file format detected. > >>>>>VIDEO: [XVID] 320x240 24bpp 29.970 fps 565.2 kbps (69.0 kbyte/s) > >>>>>========================================================================== > >>>>>Trying to force audio codec driver family libmad... > >>>>>Opening audio decoder: [libmad] libmad mpeg audio decoder > >>>>>AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000->176400) > >>>>>Selected audio codec: [mad] afm:libmad (libMAD MPEG layer 1-2-3) > >>>>>========================================================================== > >>>>>vo: X11 running at 1280x1024 with depth 24 and 32 bpp (":0.0" => local > >>>>>display) > >>>>>========================================================================== > >>>>>Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family > >>>>>Selected video codec: [ffodivx] vfm:ffmpeg (FFmpeg MPEG-4) > >>>>>========================================================================== > >>>>>Building audio filter chain for 44100Hz/2ch/s16le -> 0Hz/0ch/??... > >>>>>alsa-init: 1 soundcard found, using: default > >>>>>alsa: 44100 Hz/2 channels/4 bpf/60208 bytes buffer/Signed 16 bit > >>>>>Little Endian > >>>>>AO: [alsa] 44100Hz 2ch s16le (2 bps) > >>>>>Building audio filter chain for 44100Hz/2ch/s16le -> > >>>>>44100Hz/2ch/s16le... > >>>>>Starting playback... > >>>>>[mpeg4 @ 0x2aaaab082cb0]looks like this file was encoded with > >>>>>(divx4/(old)xvid/opendivx) -> forcing low_delay flag > >>>>>VDec: vo config request - 320 x 240 (preferred csp: Planar YV12) > >>>>>VDec: using Planar YV12 as output csp (no 0) > >>>>>Movie-Aspect is 1.33:1 - prescaling to correct movie aspect. > >>>>>VO: [xv] 320x240 => 320x240 Planar YV12 > >>>>>alsa-uninit: pcm closed-0.011 ct: -0.002 424/424 1% 0% 0.7% 0 0 48% > >>>>> > >>>>>Exiting... (Quit) > >>>>> > >>>>>Here is what I get when I start it as a normal user > >>>>> > >>>>>MPlayer 1.0pre7try2-3.4.5 (C) 2000-2005 MPlayer Team > >>>>>CPU: Advanced Micro Devices (Family: 8, Stepping: 0) > >>>>>Detected cache-line size is 64 bytes > >>>>>CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1 > >>>>>Compiled for x86 CPU with extensions: MMX MMX2 3DNow 3DNowEx SSE SSE2 > >>>>> > >>>>> > >>>>>Failed to open /dev/rtc: Device or resource busy (it should be > >>>>>readable by > >>>>>the user.) > >>>>>Playing Building_the_Great_Pyramid.avi. > >>>>>AVI file format detected. > >>>>>VIDEO: [XVID] 320x240 24bpp 29.970 fps 565.2 kbps (69.0 kbyte/s) > >>>>>========================================================================== > >>>>>Opening audio decoder: [mp3lib] MPEG layer-2, layer-3 > >>>>>AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000->176400) > >>>>>Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3) > >>>>>========================================================================== > >>>>>Error opening/initializing the selected video_out (-vo) device. > >>>>> > >>>>> > >>>>>Exiting... (End of file) > >>>>> > >>>>>I have checked the /dev/rtc and the permission is crw-rw-r-- 1 root > >>>>>root > >>>>>10, 135 2005-03-01 00:08 /dev/rtc > >>>>>and I am a member of the video group as well. > >>>>>Thanks for any help, > >>>>>Clyde > >>>>> > >>>>> > >>>> > >>>>-- > >>>>WWW: http://dean.bong.com.au LAN: http://www.bong.com.au > >>>>EMAIL: [EMAIL PROTECTED] or [EMAIL PROTECTED] > >>>>ICQ: 16867613 > >>> > >>> > >>> > >>-- > >>WWW: http://dean.bong.com.au LAN: http://www.bong.com.au > >>EMAIL: [EMAIL PROTECTED] or [EMAIL PROTECTED] > >>ICQ: 16867613 > > > > > > > > -- > WWW: http://dean.bong.com.au LAN: http://www.bong.com.au > EMAIL: [EMAIL PROTECTED] or [EMAIL PROTECTED] > ICQ: 16867613
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
