Am Monday, 10. October 2005 21:50 schrieb [EMAIL PROTECTED]: > My Asus A8V Athlon 3500 just started giving me these this morning > (after 9 months of continuous usage), and unfortunately becomes > unresponsive after only a few minutes of use. I'm frantically > trying to get everything copied off of the SATA drive onto a PATA > disk, and after that will look into it further. I'm running the > stock 2.6.13 kernel, and the only thing that has changed was a > recent apt-get upgrade run against unstable (last Sunday - > hmmm....) Still, at this point I suspect a hardware failure.
But the disk itself is OK? I mean do you suspect the disk or the MB? My machine is still running. 3 hours no without a problem. Martin > > Good luck, > tony > > On Mon, Oct 10, 2005 at 07:09:38PM +0200, Martin Kuball wrote: > > Hi! > > > > I have a machine with a Asus A8N-SLI board, a AMD Athlon64 3500 > > and a Samsung SP1614C SATA-1 hard disk. I'm running debian sarge > > with kernel 2.6.11 since may. Everything is OK, except for > > occasional hang ups in GRUB. But otherwise very stable. Until > > Last Saturday, when I got the following error(s): > > > > scsi error: <2 0 0 0> ret code = 0x8000002 > > sda: current: sense key: aborted command > > addintional sense: parity error > > end request: I/O error: dev sda, sector 3268390 (and others) > > abnormal status 0xD0 on port 0x947 > > > > The system was still responding, but I couldn't start any new > > process more and more processes got blocked when trying to read > > or write something. After a reboot everything was fine again. > > Until Sunday evening when the same problem happened again. > > > > Now what could possibly cause this trouble? Is it the hard disk? > > Is it the controller? I have not yet tried smartmon because it > > does not work with sata disks and kernel 2.6.11. Does it work > > with a recent kernel? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
