thanks a lot for pointing out the bottleneck. is that bottleneck also when no external device is attached to the scsi controller? i intend to connect the scsi chain to the workstation only occasionally for scanning and backup to have access to data by an ordinary pc. normally the scsi chain is connected to the pc.
if the scsi controller causes a bottleneck per se, what about accessing the scsi devices attached to the pc from the workstation through the zyxel adsl rooter? i need that motherboard to get the best floating point for the money. with that workstation i am already at the lower limit to do ab inition quantum chemical calculations for large molecules. thank you again francesco pietra On Wednesday 29 March 2006 00:30, Greg Madden wrote: > On Tuesday 28 March 2006 10:25, Francesco Pietra wrote: > > tyan k8we > > Fast MB, unless you have all the (external) devices left over, I would't > bother with fast scsi as I/O. With that board you have USB2, Firewire > 400, and with an add in card firewire 800. That card ad or the devices > attched to it becomes the bottleneck for perfornance. If you have to go > scsi I would get a cheaper card, I have used a Tekram DC-315U and a SIIG > AP-10, both supported by Etch. > -- > Greg Madden -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]