Zrin >> what performance do you get on this SATA II?
ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part ata1: SATA max UDMA/133 cmd 0xFFFFC20000006D00 ctl 0x0 bmdma 0x0 irq 18 ata2: SATA max UDMA/133 cmd 0xFFFFC20000006D80 ctl 0x0 bmdma 0x0 irq 18 ata3: SATA max UDMA/133 cmd 0xFFFFC20000006E00 ctl 0x0 bmdma 0x0 irq 18 ata4: SATA max UDMA/133 cmd 0xFFFFC20000006E80 ctl 0x0 bmdma 0x0 irq 18 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:40ff ata1: dev 0 ATA-7, max UDMA7, 156301488 sectors: LBA48 ata1: dev 0 configured for UDMA/133 scsi0 : ahci ata2: SATA link down (SStatus 0 SControl 300) scsi1 : ahci ata3: SATA link down (SStatus 0 SControl 300) scsi2 : ahci ata4: SATA link down (SStatus 0 SControl 300) scsi3 : ahci Vendor: ATA Model: SAMSUNG HD080HJ Rev: ZH10 Type: Direct-Access ------ SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 > sd 0:0:0:0: Attached scsi disk sda >> dd if=/dev/zero of=/tmp/test.dat bs=1M count=2048 1115684864 bytes (1.1 GB) copied, 44.5009 seconds, 25.1 MB/s >> dd of=/dev/null if=/tmp/test.dat bs=1M count=2048 1115684864 bytes (1.1 GB) copied, 52.1885 seconds, 21.4 MB/s >> did you try or plan to use the fake RAID (with dmraid)? Did not try to use the fake RAID. >> does the sound work without problems? Yes, it does when used with alsa. ALSA device list: #0: VIA 8251 with ALC655 at 0xe000, irq 19 >> does the graphics function without problems? >> which driver do you use? Yes. In Xorg, used the 'via' driver module provided by the 'xserver-xorg-video-via' package. (--) VIA(0): Chipset Rev.: 0 (--) VIA(0): Detected DFI K8M800-MLVF. Hth. -- 73s de Ragu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
