On (12/05/06 13:24), Erik Brucken wrote: > On Friday 12 May 2006 13:05, Valero Pascual wrote: > > Hello!! > > > > I have a computer with amd64 and I am trying to install the sarge for amd64 > > with a minimum CD for net, I lower the image ISO: > > should-31r0a-amd64-netinst. Antecedentes: I must say that the computer has > > two disks SATA 160Gb configured as RAID 0 from the BIOS CONFGURATION RAID, > > therefore, one should only see as a disk of about 320 Gb; previously I had > > installed Windows, I made a partition of the 160Gb of the 320 that you/they > > saw each other and I proceeded to formatear this partition and to install > > Windows and other programs for Windows. I began the installation of Sarge > > for amd64 but the moment arrived to carry out the partitions of the root / > > and I exchange or swap and to give format. Which it would be my surprise > > when observing that linux not sees a hard disk of one 320 Gb but rhater 2 > > of 160 Gb as if is 2 normal IDE. As the partition of Windows it was of > > 160Gb I didn't give him importance (this can be a hint) and I defined the > > partitions ext3 and swap for the second hard disk, then I gave format to > > the disk and seemingly the he/she made it without problems. To install > > Grup: I decide to make it in the root / of LINUX (another since problem > > doesn't allow me) but it is not possible because the denominations for the > > disks SATA should be /dev/sdb1... /dev/sdb2 I attempt it but one is not > > able to, therefore, I decide to install GRUP in the Master Boot Record, and > > it is made correctly. It finishes the installation and I restart giving me > > grup the error 21. > > > > Can somebody help me saying me that I make bad? > > > > Thank you. > > > > Diofanto. > > I had the same same error after upgrading grub some weeks ago. I am running > softraid 1 with two SATA Disks. All I was trying failed. So at the end I was > installing a base system on one of the two harddiscs root partition and > reinstalling grub. After turning on the raid everything worked again fine. > You might want to use a livecd as knoppix to install grub manually.
You may find these links useful: # http://rootraiddoc.alioth.debian.org/ # http://juerd.nl/site.plp/debianraid # http://xtronics.com/reference/SATA-RAID-Debian.htm Regards Clive -- www.clivemenzies.co.uk ... ...strategies for business -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
