Hi Antti I forgot to mention that for my two amd64 dual opterons set the transformer is 600W. Would the 540W of APC BACK-UPS RS 800VA be enough? The 1000W model is priced 470 euros in Italy. thanks again francesco pietra
On Saturday 13 May 2006 18:19, Antti Pyykko wrote: > On Sat, 13 May 2006, Francesco Pietra wrote: > > I have been offered in my country (Italy) APC (American Power Conversion) > > APC BACK-UPS RS 800VA > > [ snip ] > > > Has anyone experience with this (or other equipment to the same purpose) > > for the type on installation of my project? > > I am using that very UPS with my system. I run apcups with it and it > works very well. I suggest you forget powerchute and use apcupsd. > > > [113320] [19:16] [EMAIL PROTECTED] ~ % apcaccess status > APC : 001,040,0980 > DATE : Sat May 13 19:16:13 EEST 2006 > HOSTNAME : hanuri.dap > RELEASE : 3.12.1 > VERSION : 3.12.1 (06 January 2006) debian > UPSNAME : APC > CABLE : USB Cable > MODEL : Back-UPS BR 800 > UPSMODE : Stand Alone > STARTTIME: Tue Mar 14 03:46:34 EET 2006 > STATUS : ONLINE > LINEV : 228.0 Volts > LOADPCT : 26.0 Percent Load Capacity > BCHARGE : 100.0 Percent > TIMELEFT : 31.5 Minutes > MBATTCHG : 5 Percent > MINTIMEL : 3 Minutes > MAXTIME : 0 Seconds > OUTPUTV : 230.0 Volts > DWAKE : 000 Seconds > DSHUTD : 000 Seconds > LOTRANS : 194.0 Volts > HITRANS : 264.0 Volts > RETPCT : 000.0 Percent > ITEMP : 29.2 C Internal > ALARMDEL : Always > BATTV : 27.8 Volts > LINEFREQ : 50.0 Hz > LASTXFER : Low line voltage > NUMXFERS : 0 > TONBATT : 0 seconds > CUMONBATT: 0 seconds > XOFFBATT : N/A > SELFTEST : NO > STATFLAG : 0x07000008 Status Flag > SERIALNO : QB0420246146 > BATTDATE : 2001-09-25 > NOMBATTV : 24.0 > FIRMWARE : .o2 .I USB FW:o2 > APCMODEL : Back-UPS BR 800 > END APC : Sat May 13 19:16:22 EEST 2006 > > -- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
