Am Dienstag, 16. Mai 2006 16:09 schrieb Jo Shields: > Hans wrote: > >Hello all, > > > >does anyone got Xorg7.0 and ATI Card X700 (or similar) with ATI´s "fglrx" > >driver running ? I do, but without acceleration. Does anyone have > >acceleration got working on a pure 64-bit-system ? > > > >If yes, I would like to see his entries in xorg.conf. > > > >For me the driver works only without the kernel-module. If I start with > > the kernel-module (this one starts fine), my screen becomes blank. > > > >I suppose, the proprietrary driver part is 32-bit, the built one > > kernel-module is 64-bit. So tehey will not play together. Could that be ? > > Nope, that's incorrect. > > > Since fglrx for AMD64 is not in Debian, I suspect you've been using the > ati.com installer? If so, check where it's put all its files - > specifically, you want to know whether fglrx_drv.so has been places into > /usr/lib/xorg or /usr/X11R6/lib. If it's the latter, then you have a big > clean-up job to do. > > >(My ATI-driver version is 8.24.8) > > > > > >Best regards > > > >Hans Hi Jo !
I actually did the clean-up job already. Everything is in the right place, as it is needed on xorg7. Yes, I made the packages out of the ati.com installer. And I built also the modules from flavio on myself (loaded down the *.gz, *.fsc and *.diff) from his repository. No success at all. I know, there is fglrx indebian, but only for 32-bit, not for 64-bit. I had a similar problem with the bcm4300-module and the ipw2100-kernel-module, where the 64-bit-compiled modules did not play together with the 32-bit-binary firmware. On 32-bit-systems everything went fine ! Best regards Hans -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
