On Wed, Oct 11, 2006 at 11:44:58AM +0200, Kv237 wrote: > The bios is the 1010.bin bios from the Asus website. Using eSupport.com BIOS > agent it is reported as: > > Bios Type: Phoenix - AwardBIOS v6.00PG > BIOS ID: 10/21/2005-NF-CK804-K8N4E > OEM Sign-On: Asus K8N4-E Deluxe ACPI BIOS Revision 1010 > Chipset: AMD 1100 rev 0 > Superio: ITE 8712F rev 7 found at port 2Eh > CPU: AMD Athlon(tm) 64 Processor 3200+ 2200 MHz MAX: 3700 MHz > BIOS ROM In Socket : YES > BIOS ROM Size: 512K > Memory installed: 1024 MB > Memory Maximum: 3072 MB > Memory Slot 01: 512 MB > Memory Slot 02: 512 MB > Memory Slot 03: 0 MB > ACPI Revision: 1.0 > > (Some irrelevant information was deleted from the report) > > The report from "ifconfig -a" is as follows: > lo Link encap: local loopback > LOOPBACK MTU: 16436 Metric:1 > RX packets: 0 errors:0 dropped:0 overruns:0 frame:0 > TX packets: 0 errors:0 dropped:0 overruns:0 carrier: 0 > collisions:0 txquelen: 0 > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) > > And that is all from ifconfig. > > I am also using a static IP adress, so DHCP is not a relevant issue.
Hmm, so it really isn't detecting any ethernet ports. Does 'modprobe forcedeth' do anything from console 2? Does it add anything to ifconfig -a? I assume you are using the etch installer at this point (sarge really isn't much good for most amd64 systems). What about 'lspci -n|grep 0200'? (I don't remember if lspci is in the unstaller anymore). Anything in 'dmesg' about ethernet? -- Len Sorensen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
