On Sun, 2006-12-17 at 18:11 -0600, Seb wrote: > Hi, > > Details on my webcam and where I have it attached are: > > > ,-----[ lsusb ] > | Bus 002 Device 001: ID 0000:0000 > | Bus 001 Device 005: ID 0461:4d16 Primax Electronics, Ltd > | Bus 001 Device 003: ID 045e:00db Microsoft Corp. > | Bus 001 Device 004: ID 058f:9360 Alcor Micro Corp. > | Bus 001 Device 006: ID 0c45:6029 Microdia Triplex i-mini PC Camera > | Bus 001 Device 002: ID 04e8:324c Samsung Electronics Co., Ltd ML-1740 > Printer > | Bus 001 Device 001: ID 0000:0000 > `----- > > > Standard video conference software, e.g. kopete, ekiga, cannot communicate > with this webcam and show a "no device found" message (ekiga), but no > other useful error messages. I was able to get something with the program > sn-webcam (http://sourceforge.net/project/showfiles.php?group_id=132181), > but all I got was a "no space left on device" message. Googling for this, > it seemed it had to do with the bus device being saturated by the other > usb devices. So I tried plugging the webcam to one of the ports in the > front panel of my desktop or the back, without success -- I think Bus 001 > above is the back one, while Bus 002 is the front one. > > If I unplug the webcam from the bus shown above, dmesg gives some lines > with errors: > > > ,-----[ dmesg | tail ] > | ohci_hcd 0000:00:0b.0: leak ed ffff810074c5a370 (#81) state 2 > | usb 1-8: usb_submit_urb() failed, error -28 > | ohci_hcd 0000:00:0b.0: leak ed ffff810074c5a3c0 (#81) state 2 > | usb 1-8: usb_submit_urb() failed, error -28 > | ohci_hcd 0000:00:0b.0: leak ed ffff810074c5a410 (#81) state 2 > | usb 1-8: usb_submit_urb() failed, error -28 > | usb 1-8: USB disconnect, address 6 > | ohci_hcd 0000:00:0b.0: leak ed ffff810074c5a460 (#81) state 2 > | usb 1-8: Disconnecting SN9C10x PC Camera... > | usb 1-8: V4L2 device /dev/video0 deregistered > `----- > > > and reconnecting causes the system to freeze completely. This camera uses > the sn9c102 driver and it does seem to be loaded: > > > ,-----[ lsmod | grep 'sn9c' ] > | sn9c102 94732 0 > | videodev 29696 1 sn9c102 > | v4l2_common 28672 2 sn9c102,videodev > `----- > > > Is anybody having similar problems? Any pointers? Thanks in advance. > > > Cheers, > > -- > Seb > > The sn9c10x kernel modulue is voor v4l2 supported frontends, see this page http://bertrik.sikken.nl/webcam/index.html for some info and links
For a v4l kernel module check this page, http://mxhaard.free.fr/download.html Most frontends which you mentioned are v4l at this moment. -- -------- m.vr.gr. Gerard Klaver -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
