Len, sure it is better to know in depth every version, model no, specificites of the hardware one owns, but hey, this is all about necessity. if one needs this level of detail, as i am facing the need now that i want to go linux, and maximize performance, i will pay attention to it. but, and that was the case when i bought my machine, if you run windows + photoshop + premiere, you just want a bloody fast machine that do the job. doesnt matter if it is chipset x or y, since windows will fail anyway to get the best out of it. :& anyway, you are really right, and i do know more or less what is the machine's conf:
Asus A8V-MX via K8M800 Atlhon 64 3200+ 2.2 2.048 Gb RAM DDR 400 SATA 160 Gb seagate barracuda 7200 ATI agp Radeon 256 Samsung Syncmaster 997MB i will try the cat /proc/ commands later to have a more comprehensive specification. thanks all again rodrigo On 1/30/07, Lennart Sorensen <[EMAIL PROTECTED]> wrote:
On Tue, Jan 30, 2007 at 04:52:48PM -0200, Rodrigo Alexandre wrote: > Len, the pppoe module actually do exist in the package. it recognizes > the network adapter and proceed with authentication, but doesnt > connect. it's ok to give the full cd a try. didnt do this yet because > i am away from the comp i'm trying to install etch. but the SATA > chipset is a piece of info i cant give you. I really dont have a clue. > How can i get this info? Reading forums yesterday i thought that the > chipset people were talking about was the mainboard's, not the hd's. > when installation asks me to choose one of the drivers from the list, > it lists many different names, i remember there were about 15 > different sata ones, like sata-mv, sata-nv, sata-sis etc etc etc. > googling them i found lots of info about the mobo's chipset issue, > that's why i thought it had to do with mobo instead of hd. can > somebody clarify this for me? anyway, as soon as i get the base system > running i want to customize my linux install to get the most of my > machine, so i should start paying a bit more attention to things such > as chipsets and etc, right? so it would be great if somebody could > spot me how to find out more about it... is there a command that > rescues all hardware specs or do i have to gather it myself through > manual ways (with 'manual' i mean unscrewing the hd to check info on > the label...) I guess I am weird in expecting people actually know what hardware they own. The chipset in question would be part of the mainboard, or in some cases an add in controller. Unless you bought a name brand system, you should ahve a manual for the motherboard, which should identify at least the brand and model of it. If it is a name brand, then it is possible to find out based on the exact brand and model of the machine. Do you know either of those? The HD really doesn't have much to do with it, as long as it doesn't happen to be a model that isn't liked by a particular chipset, but most of those problems seem to have been resolved by now. -- Len Sorensen
-- Rodrigo Alexandre [EMAIL PROTECTED] (19) 8112-8252 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
