On 14-Jun-2007 18:19.16 (BST), sigi wrote: > Then I tried a new version of nvidia-kernel-source, 1.0.9755-1, compiled > and installed it with "m-a prepare" & "m-a a-i nvidia" and all went ok. > But since then, my xserver only shows up with a framerate of 50Hz - > before I had always 75Hz. > > I tried the Options "UseEDIDFreqs" "FALSE" and "ModeValidation" > "NoEdidModes" in my xorg.conf-file, but that showed no effect - and yes, > before I recompiled the nvidia-stuff, I removed nvidia-glx and > re-installed it later....
Your log contains: (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID has been (**) NVIDIA(0): disabled on all display devices. Do you have a HorizSync/VertRefresh in the monitor section that limits the display to a low refresh rate? I might add that the monitor mentioned on line 445: (--) NVIDIA(0): MED MD30917PN S14 (CRT-0): 400.0 MHz maximum pixel clock is a TFT display. Most TFT displays prefer to run at 60Hz, given they resample the input and act refresh-free (unlike CRTs). I can't imagine that it would give you "eye cancer", since the refresh rate will be imposed by the TFT itself, not the video card :) My advice: Turn EDID back on. If it doesn't fix it, turn it back off and read the display manual and put correct HorizSync/VertRefresh values into the monitor section. -- rob andrews :: pgp 0x01e00563 :: [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
