Hi, we have a new box here that seems a nice machine. It has: - gigabyte ga-m61p-s3 mobo with: nVidia Corporation MCP61 Memory Controller (rev a1) Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) nVidia Corporation MCP61 SATA Controller (rev a2) nVidia Corporation Unknown device 03d0 (rev a2) FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
It has a sata hd and 2 memory panels (1gb) of kingstom (800MHz) . The kernel 2.6.18 from debian etch recognizes all the hw and install boots without any problem. Also, the 2.6.22 from sid. Howeber, I have one big problem with this box: crash many times ..... I can boot, look the login screen, do nothing, and then the image get distorsioned and the box crash. I can boot the box, make a ssh, make ls and the box crash. I can boot the box, make an ssh, compile a kernel, a lot of things without any problem, make a logout, and the next day the box is hang. I have not any messages in the /var/log/kern or syslog .... Also, I have some annoying thing. In theory the mobo supports the memory at 800Mhz. The memory that I have, also support the 800Mhz. But, although I configure the voltages as the manual of the mobo and the memory says, I got never have a message from the bios saying that the memory is 800. Always says 667 .... So, my question is? How I can determinate if: - the memory fails (memtest done, but only 2 hours ..) - mainboard fails - debian kernel stock fails? - my fingers fails and I have a misconfigured bios ... Regards, Leo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
