2007/9/21, Hans-J. Ullrich <[EMAIL PROTECTED]>: > When I manually configure the cards, using "/etc/init.d/network restart", > the card is seeing the accesspoint (98 percent at the first time, at 2 percent > I have to do it twice) and the dhcpclient is giving the IP as required. > > Conditions: > I have two network cards, one wired (eth0) with a fixed IP (but not > connected), and the wlan card (ath0) obtaining an IP with dhcp. > Hint: both network card are configured, to access to the same gateway. > > Checked: All modules are loaded properly at boot, before obtaining an IP > > Checked: Without done an "/etc/netwiork/interfaces restart", a manually > command "dhcpclient 192.168.1.1 ath0" does not work. Error message is: Device > not known. > > Checked: ifconfig is telling me all devices, wifi0 and ath0 are available. > > So, what is the difference between the behaviour at first boot, and the > behaviour doing an "/etc/init.d/networking restart" ?
how does /etc/network/interfaces and your wpa config (if you use it) look? martin -- http://noneisyours.marcher.name http://feeds.feedburner.com/NoneIsYours -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
