On 5/19/08, Michael Fothergill <[EMAIL PROTECTED]> wrote: > > Dear folks, > > I am running an HW191D monitor I got from Novatech on my AMD Duron 1200MHz 32 > bit box under Debian Etch. > > > I also run the same monitor on an AMD64 box with a Nvidia graphics chipset in > it. It runs Debian Lenny. The nvidia card is working properly. > > I am not sure whether either box is running the HW191D monitor at the > resolution it is capable of. > > The xorg.conf file from the AMD Duron box is: > > debian:/etc/X11# more xorg.conf > # /etc/X11/xorg.conf (xorg X Window System server configuration file) > # > # This file was generated by dexconf, the Debian X Configuration tool, using > # values from the debconf database. > # > # Edit this file with caution, and see the /etc/X11/xorg.conf manual page. > # (Type "man /etc/X11/xorg.conf" at the shell prompt.) > # > # This file is automatically updated on xserver-xorg package upgrades *only* > # if it has not been modified since the last upgrade of the xserver-xorg > # package. > # > # If you have edited this file but would like it to be automatically updated > # again, run the following command: > # sudo dpkg-reconfigure -phigh xserver-xorg > > Section "Files" > FontPath "/usr/share/fonts/X11/misc" > FontPath "/usr/X11R6/lib/X11/fonts/misc" > FontPath "/usr/share/fonts/X11/cyrillic" > FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" > FontPath "/usr/share/fonts/X11/100dpi/:unscaled" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" > FontPath "/usr/share/fonts/X11/75dpi/:unscaled" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" > FontPath "/usr/share/fonts/X11/Type1" > FontPath "/usr/X11R6/lib/X11/fonts/Type1" > FontPath "/usr/share/fonts/X11/100dpi" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi" > FontPath "/usr/share/fonts/X11/75dpi" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi" > # path to defoma fonts > FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" > EndSection > > Section "Module" > Load "bitmap" > Load "ddc" > Load "dri" > Load "extmod" > Load "freetype" > Load "glx" > Load "int10" > Load "vbe" > EndSection > > Section "InputDevice" > Identifier "Generic Keyboard" > Driver "kbd" > Option "CoreKeyboard" > Option "XkbRules" "xorg" > Option "XkbModel" "pc105" > Option "XkbLayout" "gb" > EndSection > > Section "InputDevice" > Identifier "Configured Mouse" > Driver "mouse" > Option "CorePointer" > Option "Device" "/dev/input/mice" > Option "Protocol" "ImPS/2" > Option "Emulate3Buttons" "true" > EndSection > > Section "Device" > Identifier "Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA > Display Adapter" > Driver "sis" > BusID "PCI:1:0:0" > EndSection > > Section "Monitor" > Identifier "HW191D" > Option "DPMS" > HorizSync 30-80 > VertRefresh 49-75 > EndSection > > Section "Screen" > Identifier "Default Screen" > Device "Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA > Display Adapter" > Monitor "HW191D" > DefaultDepth 24 > SubSection "Display" > Depth 1 > Modes "1920x1440" "1280x1024" "1280x960" "1152x864" > "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 4 > Modes "1920x1440" "1280x1024" "1280x960" "1152x864" > "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 8 > Modes "1920x1440" "1280x1024" "1280x960" "1152x864" > "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 15 > Modes "1920x1440" "1280x1024" "1280x960" "1152x864" > "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 16 > Modes "1920x1440" "1280x1024" "1280x960" "1152x864" > "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 24 > Modes "1920x1440" "1280x1024" "1280x960" "1152x864" > "1024x768" "800x600" "640x480" > EndSubSection > EndSection > > Section "ServerLayout" > Identifier "Default Layout" > Screen "Default Screen" > InputDevice "Generic Keyboard" > InputDevice "Configured Mouse" > EndSection > > Section "DRI" > Mode 0666 > EndSection > debian:/etc/X11# > debian:/etc/X11# > > As far as I am aware the resolution it is supposed to run at is 1920 x 1440. > > I am a bit puzzled as to why these lower resolutions are present in the > file..... Maybe they should be deleted......?????
That could be deleted, but with that you could change the resolution with Ctrl-Alt-+/- If you have doubts about the videomode used read /var/log/X.org... to have a good explanation about X run. > > Suggestions on how to know that your monitor really is working at full tilt > would be appreciated. > > Regards > > Michael Fothergill > > > > > > > _________________________________________________________________ > > http://clk.atdmt.com/UKM/go/msnnkmgl0010000007ukm/direct/01/ > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > -- Perhaps the depth of love can be calibrated by the number of different selves that are actively involved in a given relationship. Carl Sagan (Contact) Jaime Ochoa Malagón Arquitecto de Soluciones Cel: +52 (55) 1021 0774 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
