> > > You create the partitions in the installer, setting the partition use to > 'raid'. You then select configure raid, and setup all your raid devices. > Then when you return to the partition tool you will see the new raid > md devices, which you then set to 'use as LVM volume', then you go to > configure logical volume management, and setup your lvm volumes there > for your actual file systems, then when you come back to the partition > tool again you will see the lvm volumes listed and you can select them > and pick the filesystem type and mountpoint for each LVM volume. >
This might be handy http://www.howtoforge.com/set-up-a-fully-encrypted-raid1-lvm-system > > -- > Len Sorensen > > > -- > To UNSUBSCRIBE, email to [email protected] > with a subject of "unsubscribe". Trouble? Contact > [email protected] > > -- Med venlig hilsen Dennis Johansen Hegnstoften 63 2630 Taastrup Tlf: 4371 8584 Mob: 27 515 217 E-mail: [email protected] www.hegnstoften.net
