Lennert Buytenhek a écrit : > On Wed, Feb 14, 2007 at 12:20:19PM +0100, Aurelien Jarno wrote: > >>>>> I also cross-compiled the kernel on a x86 laptop (1.5 GHz) and that took >>>>> me about half an hour. First, I though that it wasn't working right (I >>>> Note that you need to use an arm eabi toolchain. Building an eabi kernel >>>> with an old abi toolchain work, and the kernel seems to works, but then >>>> you will have some problems wrt to ioctls. For example Alsa do not work. >>> Hm, I used to compile my EABI kernels with an old-ABI toolchain for a >>> while, and that I think works just fine. >>> >>> The case where ALSA doesn't work is where you run an old-ABI userland >>> on top of an EABI kernel (because the kernel does not translate ioctls.) >> True, but I also experienced the reverse on my NSLU2. Ie an EABI kernel >> compiled with an old-ABI toolchain and running EABI binaries. My USB >> card was not working with ALSA. > > That sounds like you might be running into gcc PR27363. If you've built > your old-ABI toolchain without a patch for PR27363, you _will_ run into > issues of this kind.
Oh I see. I am using toolchain from http://debian.speedblue.org/ , it seems to be a bit outdated, though plainly functional to build kernels on most arches (except armel). -- .''`. Aurelien Jarno | GPG: 1024D/F1BCDB73 : :' : Debian developer | Electrical Engineer `. `' [EMAIL PROTECTED] | [EMAIL PROTECTED] `- people.debian.org/~aurel32 | www.aurel32.net -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
