Where do i get the Debian Live CD image from i am currently downloading from live.debian.net but it is going very slow about 7KB/sec . Is the a mirror site
thanks AndyC73 wrote: > > Thank you > > Is there a step by step guide to installing Debian. I am new to linux > although i successfully flashed Slug to Unslung and Openslug. But i want > to do the debian one right! > > I tried using the sercomm utility and reflashed to Debian but it does not > boot up I get 3 beeps and the top light stays orange. > Am i using the flash file which doesnt work? Where do i find the correct > one. > > If i go with Debian live and Upslug(Is that better?) which Debian live > Image do i use on P4 PC. > > Thanks Again > > Rod Whitby-2 wrote: >> >> AndyC73 wrote: >>> Can i currently install Debian using Upslug on windowsXP >> >> Upslug2 is a linux tool for flashing images onto an NSLU2. It does not >> have a windows port as far as I know. >> >> There is a SerComm upgrade tool which does much the same thing and works >> on Windows. >> >> Stay well away from the Linksys EraseAll tool - if you use it with a >> Debian image it will permanently brick your slug (unless you have JTAG >> to recover it). This is because the Debian NSLU2 images do not contain >> RedBoot. All other flashing techniques (including Upslug2 and the >> SerComm tool) are careful not to touch your bootloader. >> >> I would suggest you get a Debian LiveCD, and use it on that windowsXP >> computer to run Debian so you can use Upslug2 to flash the NSLU2. >> >> -- Rod Whitby >> -- NSLU2-Linux Project Lead >> >> >> -- >> To UNSUBSCRIBE, email to [EMAIL PROTECTED] >> with a subject of "unsubscribe". Trouble? Contact >> [EMAIL PROTECTED] >> >> >> > > -- View this message in context: http://www.nabble.com/ARM-installer-images-for-etch-%284.0%29-currently-broken-tf4306950.html#a12636317 Sent from the debian-arm mailing list archive at Nabble.com. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]