Hello, I use lenny (arm, not armel) in my Thecus N2100 with 2 1TB disks and raid1 (mirroring).
Sometimes my box hangs without any noticeable reason... I can see only these messages on console: md: data-check of RAID array md0 md: minimum _guaranteed_ speed: 1000 KB/sec/disk. md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check. md: using 128k window, over a total of 14651136 blocks. md: delaying data-check of md1 until md0 has finished (they share one or more physical units) md: md0: data-check done. md: data-check of RAID array md1 md: minimum _guaranteed_ speed: 1000 KB/sec/disk. md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for data-check. md: using 128k window, over a total of 961128704 blocks. RAID1 conf printout: --- wd:2 rd:2 disk 0, wo:0, o:1, dev:sda1 disk 1, wo:0, o:1, dev:sdb1 md: md1: data-check done. RAID1 conf printout: --- wd:2 rd:2 disk 0, wo:0, o:1, dev:sda3 disk 1, wo:0, o:1, dev:sdb3 drivers/usb/class/usblp.c: usblp0: removed Any ideas? -- Przemyslaw Kwiatkowski [Micha], [EMAIL PROTECTED], 2:480/[EMAIL PROTECTED] SMS# +48 601 238089, GPG: 2CA0 F353 85FD B0F1 1BD4 73D7 F85D 2717 "Any technology distinguishable from magic is insufficiently advanced." (c) Gregory Benford -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
