Hi Joachim On Fri, Mar 28, 2008 at 12:56 PM, Joachim Beckers <[EMAIL PROTECTED]> wrote:
> Thanks for the advice. Much needed as my slug wouldn't come up after > the upgrade. > > Does it check its hard drives after such an upgrade? It seems like the > bootlog is completely normal (network comes up btw) but the leds were > off except for the top one that was blinking (two times orange, then > green). There was a lot of disk activity, and I let it do its thing > for a while but then decided that the upgrade probably had failed. > Couldn't ping it or ssh into it. The upgrade shouldn't trigger a partition check (fsck). fscks are usually run every 30 times the drive is mounted, so it is possible that a disk check may have been coincidental. The network access would come up after a partition check so it makes sense that if it was running fsck, you would not have been able to ping or ssh to the NSLU2. I'll try the kernel on a clean installation of lenny this evening to see if I can reproduce the problem, and let you know what I find. Gordon -- Gordon Farquharson GnuPG Key ID: 32D6D676 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
