Adding maks to CC. maks any idea? * Joost Yervante Damad <[EMAIL PROTECTED]> [2008-08-28 19:39]: > On Monday 18 August 2008 09:57:16 you wrote: > > I guess, that you'll need a serial console. > > Without, you can only guess, where it stuck, like did it access the > > disks and so... > > > > If it gets that far, you probably could check the logs, as it might > > logged something of interest. > > in attachment you can find the console log. It seems to fail to find a > rootfs... > > Joost > > -- > homepage: http://damad.be/joost > photo/blog: http://damad.be/joost/blog
> RST=No > Transfer to factory test Mode : No > Reset default set:Normal > Thecus: Found PCI device Vendor ID=0x000010EC > Vendor 0x10ec > Device 0x8169 > Allocate cyg_pci_io_base=0x90000100 > Allocate cyg_pci_memory_base=0x40000100 > Thecus: Found PCI device Vendor ID=0x000010EC > Vendor 0x10ec > Device 0x8169 > Allocate cyg_pci_io_base=0x90000200 > Allocate cyg_pci_memory_base=0x40000200 > Thecus: Found PCI device Vendor ID=0x00001095 > Vendor 0x1095 > Device 0x3512 > Allocate cyg_pci_io_base=0x90000208 > Allocate cyg_pci_io_base=0x9000020c > Allocate cyg_pci_io_base=0x90000218 > Allocate cyg_pci_io_base=0x9000021c > Allocate cyg_pci_io_base=0x90000230 > Allocate cyg_pci_memory_base=0x40000400 > Thecus: Found PCI device Vendor ID=0x00001106 > Thecus: Found PCI device Vendor ID=0x00001106 > Thecus: Found PCI device Vendor ID=0x00001106 > Vendor 0x1106 > Device 0x3104 > Allocate cyg_pci_memory_base=0x40000500 > PCI: device already configured > rtl-eth0: RTL8169s/8110s Gigabit Ethernet driver 2.2 at 0xb0000000, > 00:14:fd:30:2d:9a > rtl-eth0: Auto-negotiation Enabled. > PCI: device already configured > eth1 found: bus[0] dev[2] base[b0000100] > rtl-eth1: RTL8169s/8110s Gigabit Ethernet driver 2.2 at 0xb0000100, > 00:14:fd:30:2d:9b > Ethernet rtl-eth0: MAC address 00:14:fd:30:2d:9a > IP: 192.168.1.100/255.255.255.0, Gateway: 0.0.0.0 > Default server: 0.0.0.0, DNS server IP: 0.0.0.0 > > RedBoot(tm) bootstrap and debug environment [ROM] > Red Hat certified release, version 1.93 - built 17:25:00, Feb 6 2007 > > Platform: THECUS N2100 (IOP80219) > Copyright (C) 2000, 2001, 2002, Red Hat, Inc. > > RAM: 0x00000000-0x20000000, 0x0004b890-0x1ffd1000 available, total: 512 MB > FLASH: 0xf0000000 - 0xf1000000, 128 blocks of 0x00020000 bytes each. > == Executing boot script in 3.000 seconds - enter ^C to abort > > == Executing boot script in 3.000 seconds - enter ^C to abort > > == Executing boot script in 3.000 seconds - enter ^C to abort > > == Executing boot script in 3.000 seconds - enter ^C to abort > > == Executing boot script in 3.000 seconds - enter ^C to abort > > == Executing boot script in 3.000 seconds - enter ^C to abort > > == Executing boot script in 2.710 seconds - enter ^C to abort > > == Executing boot script in 2.380 seconds - enter ^C to abort > ^C > RedBoot> thecus_setip > RedBoot> fis load ramdisk > RedBoot> fis load kernel > RedBoot> exec -c "console=ttyS0,115200 root=/dev/ram0 initrd=0xa0800000,42M > [EMAIL PROTECTED]" > Build ATAG > ATAG_MEM: Overwrite ram_end with real_region_top=0x20000000, memsize=512 M > [EMAIL PROTECTED], MACH_TYPE=1101 > Using base address 0x00200000 and length 0x00160000 > Uncompressing > Linux.................................................................................... > [ 0.000000] Linux version 2.6.25-2-iop32x (Debian 2.6.25-7) ([EMAIL > PROTECTED]) (gcc version 4.1.3 208 > [ 0.000000] CPU: XScale-80219 [69052e30] revision 0 (ARMv5TE), cr=0000397f > [ 0.000000] Machine: Thecus N2100 > [ 0.000000] Memory policy: ECC disabled, Data cache writeback > [ 0.000000] CPU0: D VIVT undefined 5 cache > [ 0.000000] CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, > 32 sets > [ 0.000000] CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, > 32 sets > [ 0.010000] Built 1 zonelists in Zone order, mobility grouping on. Total > pages: 65024 > [ 0.010000] Kernel command line: console=ttyS0,115200 root=/dev/ram0 > initrd=0xa0800000,42M mem=256M0 > [ 0.010000] PID hash table entries: 1024 (order: 10, 4096 bytes) > [ 0.010000] Console: colour dummy device 80x30 > [ 0.010000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) > [ 0.010000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) > [ 0.020000] Memory: 256MB = 256MB total > [ 0.020000] Memory: 213760KB available (2584K code, 268K data, 104K init) > [ 0.250000] Security Framework initialized > [ 0.250000] SELinux: Disabled at boot. > [ 0.250000] Capability LSM initialized > [ 0.250000] Mount-cache hash table entries: 512 > [ 0.250000] Initializing cgroup subsys ns > [ 0.250000] Initializing cgroup subsys cpuacct > [ 0.250000] CPU: Testing write buffer coherency: ok > [ 0.250000] net_namespace: 540 bytes > [ 0.250000] NET: Registered protocol family 16 > [ 0.260000] PCI: bus0: Fast back to back transfers disabled > [ 0.300000] NET: Registered protocol family 2 > [ 0.390000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) > [ 0.390000] TCP established hash table entries: 8192 (order: 4, 65536 > bytes) > [ 0.390000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) > [ 0.390000] TCP: Hash tables configured (established 8192 bind 8192) > [ 0.390000] TCP reno registered > [ 0.420000] checking if image is initramfs... it is > [ 9.510000] Freeing initrd memory: 43008K > [ 9.520000] NetWinder Floating Point Emulator V0.97 (double precision) > [ 9.520000] audit: initializing netlink socket (disabled) > [ 9.520000] type=2000 audit(9.520:1): initialized > [ 9.520000] VFS: Disk quotas dquot_6.5.1 > [ 9.520000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > [ 9.520000] JFFS2 version 2.2. (NAND) �© 2001-2006 Red Hat, Inc. > [ 9.520000] async_tx: api initialized (async) > [ 9.520000] io scheduler noop registered > [ 9.520000] io scheduler anticipatory registered > [ 9.520000] io scheduler deadline registered > [ 9.520000] io scheduler cfq registered (default) > [ 9.560000] Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ > sharing disabled > [ 9.570000] serial8250.0: ttyS0 at MMIO 0xfe800000 (irq = 0) is a 16550A > [ 9.570000] console [ttyS0] enabled > [ 9.840000] brd: module loaded > [ 9.840000] physmap platform flash device: 01000000 at f0000000 > [ 9.850000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank > [ 9.860000] Intel/Sharp Extended Query Table at 0x0031 > [ 9.860000] Using buffer write method > [ 9.870000] cfi_cmdset_0001: Erase suspend on write enabled > [ 9.870000] Searching for RedBoot partition table in physmap-flash.0 at > offset 0xfe0000 > [ 10.200000] 6 RedBoot partitions found on MTD device physmap-flash.0 > [ 10.200000] Creating 6 MTD partitions on "physmap-flash.0": > [ 10.210000] 0x00000000-0x00040000 : "RedBoot" > [ 10.220000] 0x00040000-0x00d40000 : "ramdisk" > [ 10.220000] 0x00d40000-0x00ea0000 : "kernel" > [ 10.230000] 0x00ea0000-0x00fc0000 : "user" > [ 10.240000] 0x00fc0000-0x00fc1000 : "RedBoot config" > [ 10.240000] mtd: partition "RedBoot config" doesn't end on an erase block > -- force read-only > [ 10.250000] 0x00fe0000-0x01000000 : "FIS directory" > [ 10.260000] mice: PS/2 mouse device common for all mice > [ 10.270000] i2c /dev entries driver > [ 10.280000] rtc-rs5c372 0-0032: rs5c372b found, 24hr, driver version 0.5 > [ 10.280000] rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0 > [ 10.320000] iop-adma iop-adma.0: Intel(R) IOP: ( cpy intr ) > [ 10.340000] iop-adma iop-adma.1: Intel(R) IOP: ( cpy intr ) > [ 10.340000] NET: Registered protocol family 26 > [ 10.350000] TCP bic registered > [ 10.350000] NET: Registered protocol family 1 > [ 10.360000] NET: Registered protocol family 17 > [ 10.360000] XScale DSP coprocessor detected. > [ 10.370000] registered taskstats version 1 > [ 10.370000] rtc-rs5c372 0-0032: setting system clock to 2008-08-28 > 17:28:19 UTC (1219944499) > [ 10.390000] Freeing init memory: 104K > Loading, please wait... > Begin: Loading essential drivers ... > Done. > Begin: Running /scripts/init-premount ... > Done. > Begin: Mounting root file system ... > Begin: Running /scripts/local-top ... > Begin: Loading MD modules ... > [ 12.660000] md: raid1 personality registered for level 1 > Success: loaded module raid1. > Done. > Begin: Assembling all MD arrays ... > [ 12.720000] md: md0 stopped. > mdadm: no devices found for /dev/md0 > Failure: failed to assemble all arrays. > Done. > Begin: Waiting for udev to process events ... > Done. > Done. > Begin: Waiting for root file system ... > > > Done. > Gave up waiting for root device. Common problems: > - Boot args (cat /proc/cmdline) > - Check rootdelay= (did the system wait long enough?) > - Check root= (did the system wait for the right device?) > - Missing modules (cat /proc/modules; ls /dev) > ALERT! /dev/sda1 does not exist. Dropping to a shell! > > > BusyBox v1.10.2 (Debian 1:1.10.2-1) built-in shell (ash) > Enter 'help' for a list of built-in commands. > > /bin/sh: can't access tty; job control turned off > (initramfs) > (initramfs) > (initramfs) [ 285.050000] ttyS0: 1 input overrun(s) > cat /proc/cmdline > console=ttyS0,115200 root=/dev/ram0 initrd=0xa0800000,42M [EMAIL PROTECTED] > (initramfs) [ 297.710000] ttyS0: 1 input overrun(s) > cat /proc/module > /proc/module: No such file or directory > (initramfs) cat /proc/modules > raid1 25024 0 - Live 0xbf017000 > md_mod 88212 1 raid1, Live 0xbf000000 > (initramfs) ls /dev > console ram2 tty36 > cpu_dma_latency ram3 tty37 > full ram4 tty38 > i2c-0 ram5 tty39 > kmem ram6 tty4 > kmsg ram7 tty40 > md ram8 tty41 > md0 ram9 tty42 > mem random tty43 > mice rtc tty44 > mtd0 rtc0 tty45 > mtd0ro tty tty46 > mtd1 tty0 tty47 > mtd1ro tty1 tty48 > mtd2 tty10 tty49 > mtd2ro tty11 tty5 > mtd3 tty12 tty50 > mtd3ro tty13 tty51 > mtd4 tty14 tty52 > mtd4ro tty15 tty53 > mtd5 tty16 tty54 > mtd5ro tty17 tty55 > mtdblock0 tty18 tty56 > mtdblock1 tty19 tty57 > mtdblock2 tty2 tty58 > mtdblock3 tty20 tty59 > mtdblock4 tty21 tty6 > mtdblock5 tty22 tty60 > network_latency tty23 tty61 > network_throughput tty24 tty62 > null tty25 tty63 > port tty26 tty7 > psaux tty27 tty8 > ptmx tty28 tty9 > ram0 tty29 ttyS0 > ram1 tty3 ttyS1 > ram10 tty30 urandom > ram11 tty31 vcs > ram12 tty32 vcsa > ram13 tty33 zero > ram14 tty34 > ram15 tty35 > (initramfs) > -- Martin Michlmayr http://www.cyrius.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
