Hi, set udev_log="debug" in /etc/udev/udev.conf and try it again. Now you should see more information.
greetings bauerm Am Freitag, den 29.08.2008, 10:54 +0200 schrieb Xan: > Hi, > > I have attached to slug a hub of 4 ports and in one port I plug a net > usb key. > This key has ralink driver > > kernel detects it (you can show that in dmesg), but it does not put any > interface (I have only eth0 and lo). > > What can I do for having interface present in ifconfig? > Please, step by step. I'm a begginer. > I want to use rt2x00 instead of old rt2570 driver > > Thanks a lot, > Xan. > > [dmesg] > > usb-storage: device found at 2 > [42949385.830000] usb-storage: waiting for device to settle before scanning > [42949385.940000] usb 1-2.4: new high speed USB device using ehci_hcd > and address 4 > [42949386.190000] usb 1-2.4: configuration #1 chosen from 1 choice > [42949386.200000] usb 1-2.4: New USB device found, idVendor=14b2, > idProduct=3c22 > [42949386.210000] usb 1-2.4: New USB device strings: Mfr=1, Product=2, > SerialNumber=0 > [42949386.220000] usb 1-2.4: Product: 802.11 bg WLAN > [42949386.220000] usb 1-2.4: Manufacturer: Ralink > > [dmesg] > eth0: MII PHY 1 on NPE-B > [42949420.720000] phy0: Selected rate control algorithm 'pid' > [42949421.740000] Registered led device: rt73usb-phy0:radio > [42949421.750000] Registered led device: rt73usb-phy0:assoc > > [lsmod] > lsmod > Module Size Used by > ipv6 288308 12 > arc4 1760 2 > ecb 2784 2 > crypto_blkcipher 17572 1 ecb > evdev 8672 0 > rt73usb 21696 0 > crc_itu_t 1984 1 rt73usb > rt2x00usb 9664 1 rt73usb > rt2x00lib 25120 2 rt73usb,rt2x00usb > rfkill 6196 1 rt2x00lib > input_polldev 4040 1 rt2x00lib > ixp4xx_eth 12280 0 > ixp4xx_npe 8000 2 ixp4xx_eth > mac80211 167420 2 rt2x00usb,rt2x00lib > firmware_class 7648 2 rt2x00lib,ixp4xx_npe > ixp4xx_beeper 2816 0 > ixp4xx_qmgr 5400 6 ixp4xx_eth > cfg80211 26088 2 rt2x00lib,mac80211 > ext3 123304 7 > jbd 45396 1 ext3 > mbcache 7968 1 ext3 > sd_mod 22736 9 > usb_storage 82151 8 > scsi_mod 111076 2 sd_mod,usb_storage > ohci_hcd 18276 0 > ehci_hcd 35244 0 > usbcore 128732 6 > rt73usb,rt2x00usb,usb_storage,ohci_hcd,ehci_hcd > > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
