Andrea Lanza <[EMAIL PROTECTED]> writes: > Yes, SS4000E , based on EM-7210 card. > > I got the kernel sources from www.kernel.org > I took version 2.6.25.1 > then I patched it applying all the patches present in > > http://git.rtp-net.org/?p=ss4000e.git;a=summary
ok. So you have the patches and should have the max speed available atm. There may be newer version of the dma patches but I didn't find the time to look at that. > so actually I didn't apply "dma_test.patch" > > Do you think try to recompile zImage after applying this patch could bring to > better performance ? ok. this patch has no influence on the disk performances. It may have some on the network but I'm not sure this patch is right (that's why it's commented). > > My second question was about disks status led: It could be fine to see the > lighted when they > are working. With the original software they lights on traffic, so I think > that they are not > broken. The disks leds are disabled by default and don't have a trigger to enable them. Look at the /sys/class/leds/ directory. If you want to enable them, echo '1' in the brightness file. For instance: echo 1 > /sys/class/leds/HD1:green/brightness The hardware will do the rest for the disk I/O access for the green leds. Arnaud -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
