Hi, I have tried to install Debian Lenny on my second NSLU2 using a USB stick. I followed the instructions here: http://www.cyrius.com/debian/nslu2/ During boot the following error is seen on the serial console:
[42949405.560000] sd 0:0:0:0: [sda] Result: hostbyte=0x01 driverbyte=0x00 [42949405.570000] end_request: I/O error, dev sda, sector 1246395 [42949405.570000] sd 0:0:0:0: [sda] Result: hostbyte=0x01 driverbyte=0x00 [42949405.580000] end_request: I/O error, dev sda, sector 1225939 [42949405.590000] EXT3-fs error (device sda2): ext3_find_entry: reading directory #24327 offset 0 [42949405.610000] EXT3-fs error (device sda2): ext3_find_entry: reading directory #24825 offset 0 [42949405.630000] EXT3-fs error (device sda2): ext3_find_entry: reading directory #24001 offset 0 [42949405.640000] EXT3-fs error (device sda2): ext3_find_entry: reading directory #24325 offset 0 [42949405.650000] EXT3-fs error (device sda2): ext3_find_entry: reading directory #8001 offset 0 [42949405.670000] EXT3-fs error (device sda2): ext3_find_entry: reading directory #24690 offset 0 [42949405.690000] EXT3-fs error (device sda2): ext3_find_entry: reading directory #24690 offset 0 [42949405.700000] ehci_hcd 0000:00:01.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [42949405.700000] usb usb3: configuration #1 chosen from 1 choice I have tried using a second USB stick with the same result. Any ideas are welcome! /Magnus See full console log here: http://www.nabble.com/file/p22608464/capture.TXT capture.TXT -- View this message in context: http://www.nabble.com/NSLU2-Lenny-install-problem-tp22608464p22608464.html Sent from the debian-arm mailing list archive at Nabble.com. -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
