Hi JF,

I also use the daily image to boot ,It can boot to the Netboot Installer ,
can install ,but can not install the kernel to
the flash .

fis load rammode
g
load -v -r -b 0x01808000 -m tftp initrd.gz
load -v -r -b 0x01008000 -m tftp zImage
exec -c "console=ttyS0,115200 rw root=/dev/ram mem=2...@0xa0000000" -r
0x01800000


thanks

Kenny Kwok

On Wed, Jul 29, 2009 at 9:18 PM, JF Straeten <[email protected]> wrote:

>
> Hello Wouter,
>
>
> On Tue, Jul 28, 2009 at 07:06:13PM +0200, Wouter Verhelst wrote:
>
> > It's probably easier if you use the following instead:
> >
> > exec -c "console=ttyS0,115200 root=/dev/ram mem=2...@0xa0000000" -r
> 0x01800000
> >
> > that will convert the numbers for you. Also note the "256M" as opposed
> > to "256".
> >
> > Second, you need a more recent kernel -- the one in lenny does not work.
>
> Many thanks for your instructions (I've also seen your first message)
> and for your work !
>
> I've tried with the daily images you've pointed, loading them by tftp
> by hand for a first try, rather then flashing the nas with
> ss4000e.pkg.
>
> Everything went fine, till the flash-kernel process which failed.
>
> The relevant lines from the log are :
>
> Jul 29 09:44:16 in-target: Paramétrage de flash-kernel (2.21) ...
> Jul 29 09:44:17 main-menu[2196]: (process:4978):
> /var/lib/dpkg/info/flash-kernel-installer.postinst:
> Jul 29 09:44:17 main-menu[2196]: (process:4978): line 141:
> Jul 29 09:44:17 main-menu[2196]: (process:4978): syntax error: ")"
> unexpected (expecting ";;")
> Jul 29 09:44:17 main-menu[2196]: (process:4978):
> Jul 29 09:44:17 main-menu[2196]: WARNING **: Configuring
> 'flash-kernel-installer' failed with error code 2
> Jul 29 09:44:17 main-menu[2196]: WARNING **: Menu item
> 'flash-kernel-installer' failed.
>
>
> And the culprit line (141) is a typo, as you will see in this excerp
> from the postinst script :
>
> case "$machine" in
>
>     [...snip...]
>
>        "Thecus N2100" | "Thecus N4100")
>                in-target update-initramfs -u || true
>        ;;
>        "QNAP TS-109/TS-209" | "QNAP TS-119/TS-219" | "QNAP TS-409")
>                in-target update-initramfs -u || true
>                if ! apt-install uboot-mkimage; then
>                        error "apt-install uboot-mkimage failed"
>                fi
> 141-->  "Lanner EM7210")
>                in-target update-initramfs -u || true
>        ;;
> esac
>
>
> The double semi-colon « ;; » to close the QNAP case item is missing...
>
> Is it a means to finish the installation ?
>
> I'm not a guru of d-i at all, but I have the feeling that with a new
> package in the sid repository, d-i would download it and follow the
> installation from where it was.
>
> I've retried the same menu item (flash-kernel), to so see what's going
> on in the log, and this is stated :
>
> Jul 29 11:31:01 main-menu[2196]: INFO: Menu item 'flash-kernel-installer'
> selected
> Jul 29 11:31:10 in-target: Lecture des listes de paquets...
> Jul 29 11:31:12 in-target:
> Jul 29 11:31:12 in-target: Construction de l'arbre des dépendances...
> Jul 29 11:31:15 in-target:
> Jul 29 11:31:15 in-target: Lecture des informations d'état...
> Jul 29 11:31:15 in-target:
> Jul 29 11:31:21 in-target: flash-kernel est déjà la plus récente version
> disponible.
> Jul 29 11:31:21 in-target: 0 mis à jour, 0 nouvellement installés, 0 à
> enlever et 0 non mis à jour.
>
>
> But it seems not a solution to correct the postinst script by hand
> before restarting this menu item, because the log follows whith :
>
> Jul 29 11:31:21 main-menu[2196]: (process:5316): mv: cannot rename
> '/target/usr/sbin/flash-kernel': No such file or directory
> Jul 29 11:31:21 main-menu[2196]: WARNING **: Configuring
> 'flash-kernel-installer' failed with error code 1
> Jul 29 11:31:21 main-menu[2196]: WARNING **: Menu item
> 'flash-kernel-installer' failed.
>
>
> I suppose that flash-kernel isn't installed because the postinst
> script failed (?).
>
> So, any advice to follow ?
>
> Many thnaks in advance, of course,
>
>
>
> --
>
> J.-F. STRAETEN
>
> ---
> Mutt 1.5.18 - Debian GNU/Linux
>
>
> --
> To UNSUBSCRIBE, email to [email protected]
> with a subject of "unsubscribe". Trouble? Contact
> [email protected]
>
>


-- 
Kenny Kwok

Reply via email to