On Thu, Sep 10, 2009 at 06:28:40PM -0500, Tom Judge wrote: > Hi, > > I have been trying to use the daily image for the armel installer on > my ss4000-e but running into some issues. > > When I try to upload the .pkg image file to the web interface it > always gets to about 15% then stalls and reboots. After the reboot > the system always comes back with the intel firmware.
Bad. I must say I hadn't been able to test that part very much, so this is not good news; it may mean that the .pkg file generation is broken. > I have the serial console connected at 115200 bps (cu -s115200 > -lttyS0) using a standard serial connector and null modem cable and > never get anything but junk on the console. Hrm. I said that the machine was set to 115200, but that was based on the observation from one particular machine -- certainly not on documentation or something. It might be that this is not standard behaviour. You could try using other baud rates; if you get junk, that usually does point to incorrect baud rate. -- The biometric identification system at the gates of the CIA headquarters works because there's a guard with a large gun making sure no one is trying to fool the system. http://www.schneier.com/blog/archives/2009/01/biometrics.html -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
